751647
25
Zoom out
Zoom in
Previous page
1/33
Next page
21
WARNING A factory reset will permanently delete all your personal settings, timers
and stored channels. Please consider this before you perform a factory
reset.
Information Read the technical details of your receiver, like model number, Software/
Hardware version and serial number. This information could be asked during
a service call or repair request.
Software update
Select Software Update in the main menu and press OK or u to select.
Download the required update le for your receiver model from the support page on our website
www.strong.tv or contact your local dealer. Unzip the le on your computer, if necessary, and copy
it to root folder of your USB storage device. Connect the USB storage device to the USB port of the
receiver. Press MENU and select Software Update By USB. Press OK to enter the software le list. Select
the le containing the software image and press OK to initiate the software update. An attention
banner will now be displayed. Press OK to start the update (or to cancel it). Follow the instructions
displayed on screen. The update process will take some time. After the update process has been
completed the receiver will restart and show the last watched channel.
WARNING NEVER power o the receiver or remove the USB device during the
software update process. Doing so might cause irreparable damage to
your receiver and will void your warranty.
Banner on screen: Set the time-out for the info banner. Possible settings are: 3, 5, 7 seconds.
7.7 USB
Press MENU and select USB. The menu provides the Multimedia feature for playback of Music, Photo
and Movie. The dierent le formats listed below are supported. In this menu you can make movie
and photo congurations and format the USB device into a format accepted by the receiver. The unit
supports USB devices with FAT and FAT32 format. Make sure your USB device is formatted correctly.
NOTE:
n STRONG cannot guarantee compatibility (operation and/or bus power) with all USB
mass storage devices and assumes no responsibility for any loss of data that may occur
when connected to this unit.
n With large amounts of data, it may take longer for the system to read the contents of
a USB device.
n Some USB devices may not be properly recognized. Even when they are in a
supported format, some les may not play or display depending on the content.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7008 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7008

Strong SRT 7008 User Manual - German - 39 pages

Strong SRT 7008 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info