751647
19
Zoom out
Zoom in
Previous page
1/33
Next page
15
7.3 Channel Search
To access the menu press MENU and select Channel Search. It contains two options: Dish setup and
DB (Data Base) Management. Select an option and press OK to enter it. Press to exit the menu.
7.3.1 Installation
7.3.1.1 Dish setup
Use p/q to highlight the satellite your dish is aimed at. Its antenna settings will be shown at the
right side. You can enter the right side with the tu buttons and return to the satellite list with .
7.3.1.2 Congure the antenna settings for the selected satellite
LNB Type: Press tu or OK to show the list of LNB Types. The Universal LNB
(09750/10600 MHz) is supported – the most used on the market. SatCR A
and SatCR B are used for SatCR systems. If only 1 SatCR LNB is connected,
use SatCR A. SatCR systems are mainly installed by professional experts. An
optional satellite splitter is required for multi-users.
LNB Power: Use tu to set the LNB power. 13/18V is the setting for a Universal LNB.
22KHz: Use tu to switch the 22KHz oscillator signal on or o. Auto is the setting for
a Universal LNB.
DiSEqC1.0: To select the correct port from up to 4 (if available) for the corresponding
LNB.
DiSEqC1.1: To select the correct port from up to 16 (if available) for the corresponding
LNB.
Motor: If using a motor driven dish, press tu to choose between DiSEqC1.2 and
DiSEqC 1.3 depending on the motor type you use.
DiSEqC 1.2
DiSEqC 1.2 is a protocol for motor-driven dishes, the dish/motor-combination itself needs to be
aligned due South (North for Southern hemisphere) at its reference position at 0°. It is possible to
manually search and store every satellite individually.
Refer to the manual of your motor-drive for more detailed information. Modern motor drives have
usually also the capability of the enhanced DiSEqC 1.3 protocol, which would be preferred, since it
can nd satellite positions automatically, relative to a geographical location.
Move the motor to the right position for locking the signal like explained below. Press OK to enter
the submenu.
Move Continue: Press tu for moving West/East. Press the opposite tu to stop moving.
Move Step(1): Press tu for moving West/East in 0.3° step.
Store Position: To store the current motor position for selected satellite. If your dish is
physically obstructed to the East or West (example by a wall), you can limit its
moving range by pressing the RED button to Set Limit.
Use:
Move Continue: Press tu for moving West/East. Press the opposite tu to stop moving.
Move Step(1): Press tu for moving West/East in 0.3° step. Check if you are still well clear
of the obstruction. Then select Set East or West Limit, according to the
direction, and press OK twice to store. Repeat if there is also an obstruction
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7008 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7008

Strong SRT 7008 User Manual - German - 39 pages

Strong SRT 7008 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info