750856
23
Zoom out
Zoom in
Previous page
1/33
Next page
19
7.3.2.2 Backup to USB
Press OK to make a backup of the data base. A DBM le „HB_DATABASE_DDMM.DBM” with the
current date (day and month), will be created on the USB device. When the DB has been successfully
stored a message will be displayed on screen. Press until the OSD menu disappears.
7.3.2.3 SatCR
If a SatCR LNB is used, please refer to the manual of that LNB to obtain the technical data about User
Bands numbers and corresponding frequencies.
Note: SatCR can only work in combination with an optional multi-output (max.
8) satellite splitter and a SatCR LNB, example STRONG type SRT L780 (max.
4 users). Note: SatCR cannot be combined with any other DiSEqC function.
SatCR systems are mainly installed by professional experts.
SatCR A Select SatCR A with p/q and OK, if you only use one SatCR LNB.
SatCR B When using a two satellite SatCR system, select also the 2nd LNB and setup as
described below.
System Automatic select: Pre-programmed User Bands are installed, refer to the
manual of your LNB to know which system is supported by the LNB.
IF Channel Manual select: Select the User band ID number according to the
specications of your SatCR LNB. Note: Any SatCR LNB user in the chain
needs a dierent Channel ID number.
Center Freq Manual select: Select the Centre Frequency according to the specications of
your SatCR LNB, corresponding with the correct IF Channel. Note: Any SatCR
LNB user in the chain needs a dierent Centre Frequency.
Press to store.
7.4 Time and date settings
Press MENU and select Time. The menu provides options to adjust the time and date settings.
Press p/q to select an option and tu to adjust the setting. Press to exit the menu.
Time Oset : Select Auto for automatic time and date updates from live signal or Manual
for entering them manually.
Time Zone: Select the Oset from GMT standard time.
Date: Enter the date when Time Oset is set to Manual.
Time: Enter the time when Time Oset is set to Manual.
Auto-Standby This feature is implemented for power saving. The receiver will turn to
Standby automatically if no command from the remote is received for the
selected time period. Default is 3 hours. It can also be turned O.
NOTE: If there are timers running, the auto standby function will be disabled for
the booked time.
Timer Enter to the timer (schedule) function. Please refer to section 7.4.2 for details.
Daylight Saving Time Select On or O depending on the year’s period.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7006 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7006 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7006

Strong SRT 7006 User Manual - German - 39 pages

Strong SRT 7006 User Manual - French - 32 pages

Strong SRT 7006 User Manual - Italian - 32 pages

Strong SRT 7006 User Manual - Spanish - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info