3.3 Connecting multiple xed LNBs using a DiSEqC switch
Fig. 8
a) Connect the LNBs of your xed antenna to the inputs of a DiSEqC switch
b) Connect the output or “to receiver” connector of the DiSEqC switch to the SAT IN connector on
your receiver.
c) Refer to section 3.1 or 3.2 for TV and mains connections.
3.4 Connecting to digital audio amplier
Fig. 8
Connect one end of a good quality coaxial audio cable to the S/PDIF output of your receiver and the
other end to the coaxial audio input of your home theatre, amplier or any other device supporting
digital audio.
3.5 Connecting a USB storage device
Fig. 8
NOTE It is recommended to use USB 2.0 or higher storage devices for recording
and play back of TV programmes or HD movies.*
NOTE Timeshift/recording and playback only works properly when a fast
USB storage device such as a USB2.0 HDD is connected to the receiver.
Timeshift/recording and playback of HD content requires a sucient read/
write speed of the used USB storage device.*
*This user manual describes the full functionality including the recording function and may not be applicable if the software for recording via USB has
not yet been installed.
4.0 FIRST TIME INSTALLATION
After all connections have been made properly, switch on your TV and make sure the receiver is
connected to the main power. If you are using the receiver for the rst time or restored to factory
default, the Installation guide menu will appear on your TV screen. Use tu to select the OSD
Language of your preference. Set the other options as are appropriate for your situation. HDMI output
is always available.TV format with HDMI connection is 16:9 Wide screen.
NOTE If Germany or Italy is selected as country, a pre-installed channel list is
available. German channels from ASTRA 19.2E will be installed. Italian
channels from Hotbird 13E will be installed.
You can continue to Channel search and install further channels as described below or directly go to
viewing mode by pressing OK to start enjoying the pre-installed channels immediately.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Strong SRT 7006 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Strong SRT 7006 in the language / languages: English as an attachment in your email.
The manual is 0,97 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
