Installation
16
Once you have confirmed the satellite signal strength, the Channels Search menu is
displayed.
Channels Search menu
The default parameters allow you to install all the Viasat Channels.
If you want to do a specific installation, use a specialized satellite magazine to get the
correct figures for following settings.
(frequency (MHz), Polarization, Symbol rate and FEC fields are not available if
you select Fast scanning or Manual scanning at Installation Type field).
Installation type
Depending on the desired installation, select:
- Network: to install a pre-defined network,
- Bouquet: to install a pre-defined network,
- Transport: to install a pre-defined transponder,
- Fast scanning: to install a predefined list of frequencies on a dedicated satellite,
- Manual scanning: to scan al the frequencies on a dedicated satellite.
If you have selected SMATV at Antenna configuration menu, only Manual scanning is
available.
Satellite
(This field can only be selected if you have selected DiSEqC at the Antenna
Configuration menu.)
Choose a satellite from its LNB index.
Frequency (MHz)
With digit buttons of your remote control enter the frequency of the desired
transponder.
Polarization
According to the transponder polarity, select Vertical or Horizontal.
Symbol rate
With digit buttons of your remote control enter the correct symbol rate.