480582
20
Zoom out
Zoom in
Previous page
1/22
Next page
PART 1 • English
19
English
A.1 PROBLEM SOLVING
There may be various reasons for the abnormal operation of the unit. Therefore, if the unit does
not work properly, check it according to the procedures shown in the table below:
Symptom Cause Remedy
The display on front panel does
not light up.
The power cord is not plugged in. Check that the power cord is plugged in to the wall outlet.
No picture or sound Wrong connection of the Audio/Video
output of the receiver to TV.
Audio muting.
TV power off.
Connect the Audio/ Video output of the receiver to TV
correctly.
Press the Mute button
Turn TV on.
No picture The receiver can’t receive the signal
Incorrect values of some
tuner parameters.
Wrong direction of the dish
Check the antenna cable, replace the cable, or connect
the cable to the receiver tightly.
Set the values of the tuner parameters correctly in the
installation menu.
Check the signal strength with a spectrum analyzer and
adjust your dish correctly.
The remote control does not work The batteries of the remote controller
are not inserted or exhausted
Check whether the batteries are inserted correctly in your
remote control. Check the batteries, and if exhausted
replace the batteries in the remote control.
A.2 SPECIFICATIONS
Tuner
Input Frequency Range: 950 ~ 2150 MHz
Input signal level: -65 ~ -25dBm
LNB Power: 14/18 V DC, max. 400 mA
LNB switch control: 22 kHz
DiSEqC Version 1.0 & 1.2 compatible
Demodulator
Modulation: QPSK
Input Symbol Rate: 2 ~ 45 Ms/s
SCPC & MCPC signals from C & KU band satellites
Video Decoder
Profile level: MPEG-2 Main profile @ Main level
Data Rate: Up to 15 Mbit/s
Video Resolution: 720 x 576, 720 x 480
Video Format: NTSC, PAL, SECAM
Aspect Ratio: 4:3, 16:9
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 6502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 6502 in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info