424584

Strong srt 6155 Manual

7
Zoom out
Zoom in
Previous page
1/22
Next page
PART 1 • English
7
2.0 Your Receiver
2.1 Front Panel
(Please see inside cover Figure 1)
1. Power Button
Turns the receiver ON/OFF.
2. Stand-BY/ ON/ SIGNAL (3 LEDs)
The red LED is the “stand-by” indicator. The green LED is the “Power On” indicator.
The orange LED lights up once you correctly receive a satellite signal (signal locked).
3. UP/DOWN Buttons
Move the cursor UP/DOWN in Menu state. Changes the channels UP/DOWN in no menu state.
4. LED Display
This 4-digit LED panel indicates the time or the program number.
2.2 Rear Panel (Please see inside cover Figure 2)
1. SAT IN (LNB IN)
Connect the I.F. digital signal from your LNB of your satellite dish to this connector.
2. SAT OUT
Gives you the possibility to connect an extra receiver (analogue or digital).
3. AUDIO Right (Red RCA) and Left (White RCA)
These connectors give you the possibility to connect the audio signal to an external amplifier or to the audio input of your TV.
4. VIDEO (Yellow RCA)
This connector has a constant video signal for additional VCR-connections
5. TV Scart Connector
Use this connector to connect your receiver to your TV using a scart cable.
6. VIDEO Scart Connector
Use this connector to connect your receiver to your video recorder using a scart cable. Your video signal will now be looped
through to your TV.
7. IR SENSOR
Use this connector to connect an external remote eye if you wish to store your receiver in a place where the IR on your
receiver cannot communicate with the remote. For example, if you wish to put your receiver in a closed environment such as
a well ventilated closet, then this accessory will be useful because it can allow the remote control to control the receiver
through the remote eye.
8. RS 232 Serial Port
This serial port can be used to connect your PC to your receiver, and enables you to download new versions of software into
your receiver. Detailed information about downloading software into your receiver can be found on our website
(www.strongsat.com).
Note
: It is recommended to ONLY use the original software provided via our website. Loading other versions of software not
adapted to your model number can cause severe damage to your receiver, and will not be covered by the warranty.
9. Input Antenna
RF Modulator (female part). If you have cable TV or if you have an outdoor antenna, then you can connect the RF cable
coming from the antenna or wall connector to this ANT input. If you use a scart cable to connect the receiver to your TV,
the additional antenna can be put directly into your TV.
10. To TV
RF Modulator (male part). If you do not use a scart cable to connect your receiver to your TV, or if you have connected a
cable to the ANT input, you will have to use this connector to connect the receiver to your TV by using a coaxial cable.
11. S/PDIF
Use this coaxial output to connect your receiver to the input of your digital audio amplifier.
12. Power Cord
Your receiver requires a mains voltage supply of 90~240V AC (Auto-selectable), 50~60Hz+/-5%. Make sure to check the
power specification of the wall outlet before connecting your receiver to the main power.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong srt 6155 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong srt 6155 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong srt 6155

Strong srt 6155 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info