424585
18
Zoom out
Zoom in
Previous page
1/33
Next page
Konvertor (LNB):
Vyberte „Konvertor“ (LNB). Tlačítky Doprava/Doleva vyberte požadovaný konvertor. Pokud by
jste chtěli změnit parametry konvertoru, stlačte tlačítko OK. Tím se dostanete do podmenu
nastavení konvertoru.
Nastavení konvertoru LNB:
Důkladně si prostudujte technické údaje konvertoru případně DiSEqC nebo 0/12 V přepínače a DiSEqC
motoru na natáčení paraboly. Pokud tyto údaje nepoznáte, nebo si nejste jistý jak je použít v systému,
doporučujeme touto instalaci pověřit odborníka.
1. Stiskněte tlačítko Menu.
2. Tlačítky Nahoru/Dolů vyberte „Instalace“ (Installation), a stiskněte tlačítko OK.
3. Tlačítky Nahoru/Dolů vyberte „Nastavení konvertoru“ (LNB Set-up), a stiskněte tlačítko OK.
4. Zkontrolujte nastavení hodnot a typu vašeho konvertoru (LNB). ístroj dokáže rozlišit 16 dru
konvertorů. V kladním nastavení je (LNB 1) konvertor typu UNI, s LO 9750/ 10600 MHz,
DiSEqC vypnuté a konvertor na pevný (to znamená, že parabola nebude natáčená).
5. Tlačítky Nahoru/Dolů se přesuňte na políčko menu, které chcete změnit a tlačítky
Doprava/Doleva nastavte požadovanou hodnotu.
n Konvertor (LNB):
pomocí menu můžete nastavit až 16 druhů konvertorů.
n Typ konvertoru (LNB Typ):
Zde se zadávají přesné parametry konvertoru. 3 UNIVERZÁLNÍ konvertory (Uni 1...3) a
jeden Single (starý typ konvertoru) je možné nastavit. U Single konvertoru musíte zadat
frekvenci LO, který ve většině případech má hodnotu 10000. V případě UNI 1 je LO
9750/10600 MHz, UNI 2 = 9750/10700 MHz a UNI 3 = 9750/10750 MHz. Nejpoužívanější
konvertor v současnosti je UNI 1.
n Napájení konvertoru (LNB Power):
Nejběžnější způsob je napájení napětím 13/18 V, ale pokud je třeba je možné změnit na
stálé napětí 13 V, nebo 18 V. V případě pokud nepotřebujete napětí pro konvertor, může se i
vypnout.
n Konvertor paraboly (LNB Dish):
Nastavuje se druh paraboly. Pokud je parabola fixní (pevná) je třeba nastavit „PEVNÁ“,
pokud se bude natáčet DiSEqC 1,2 motorem, potom je nutné nastavit „NATÁČENÁ“. Pokud
budete používat natáčení pomocí DiSEqC 1,2 motoru, potom prostudujte odstavec
Nastavení pozicionéru“ (5.1431).
n DiSEqC přepínač (DiSEqC switch):
V základním nastavení je vypnuté („Off”). Pokud použíte epín DiSEqC, tak ho nastavte
podle typu DiSEqC epínače na V 1.0 nebo V1.1. Pokud je přenač 2 nebo 4 vstupový, tak
nastavte V 1.0. V ípadě více jako 4 vstupoho DiSEqC přepíne (max. 16) nastavte V 1.1.
n DiSEqC vstup (DiSEqC input):
Pokud jste v předcházejícím menu nastavili typ „V 1.0”, tak můžete použit max. 4 (1...4)
vstupový přepínač, v případě „V 1.1” max. 16 (1...16) vstupů.
PART 7• Quick Set Up Guide • Czech
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong srt 6125 fta at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong srt 6125 fta in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong srt 6125 fta

Strong srt 6125 fta User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info