424585
5
Zoom out
Zoom in
Previous page
1/33
Next page
Tip: Check the level and quality of the signal bar before searching any channels. The signal level of the
TP of the current satellite is displayed. The green bar is displayed if the settings are correct, other-
wise the red bar is displayed and you cannot get the channel. In the latter case, check if your dish
is aimed at the selected satellite or if the DiSEqC switch of the LNB overlaps with another satellite.
Also, change the Frequency until the Green bar is displayed to get the valid transponder. To switch
between the TV/Radio channels list, you will have to press the TV or Radio buttons on your remote
accordingly.
3.3 LNB Set-up
To set up your LNB, please apply the following steps:
1. Press the Menu button, select Installation”, selectLNB Set-up” and press OK.
n LNB: Up to 16 LNBs are available, select the correct one according to your LNB specifi-
cations. The Default is set to Universal mode (9750/10600MHz).
n LNB Type: Select the LNB type from Universal 1 ~ 3, and Single. You should type
the LNB value in Single. In Single, the item parameter is 0 or another number. In
UNI1=9750/10600 MHz, UNI2=9750/10700MHz, UNI3=9750/10750 MHz
n LNB Dish: Using the Left/Right buttons, select “Fixed” or “Motorised” (Move) Dish. If
you use a motorised dish, read the “Positioner Set-up” instructions below.
n DiSEqC switch: The default is Off. To use the DiSEqC switch, set up the DiSEqC version
you have (V1.0 or V1.1).
n DiSEqC Input: Select position 1~4 if DiSEqC switch is DiSEqC V1.0. Select position 1~16
if DiSEqC switch is DiSEqC V1.1.
3.4 Positioner Set-up (if you are using a Motorised positioner with DiSEqC1.2)
If you are using a motorised positioner with DiSEqC 1.2 you will have to set the positions of the
satellites you want to scan. This function is available only if in the “LNB Set-up menu and the LNB Dish
field is set to “Moved. As described inLNB Set-up” above.
1. Select the “Dish Position” field in the “Channel Set-up” menu and press the OK.
2. Go to field “Centre and use your Left/Right buttons to put the centre field to “ON”.
3. Press OK, and your dish will move to the centre position. It takes your dish maximum 30
seconds to move to its central position.
To set the position of your selected satellite:
1. Go to theMovement field and move your dish towards the correct direction, and keep this
direction button pushed in continuously. Once the receiver has found the correct position for
the selected satellite, the word Lockedwill appear above the signal level and quality indicator.
2. Go to theSave eld, set it to ON and press OK. Press Red, Blue or Green to search channels.
3. After the scanning is finished, press the BACK button to go to view mode.
PART 7 • Quick Set Up Guide • English
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong srt 6125 fta at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong srt 6125 fta in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong srt 6125 fta

Strong srt 6125 fta User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info