751405
14
Zoom out
Zoom in
Previous page
1/26
Next page
Before starting the scanning, you can also select Skip scan to skip the initial setup process. In this
case, to search and store your channels you may do an automatic channel search by following the
instructions in the next section Performing an automatic channel search.
During the setup, you can follow the hints available at the bottom of the screen to return to the
previous step by pressing t. Or press Exit to exit or interrupt the search halfway.
Once the automatic search ends, the set enters the next step automatically. Press p q to select your
location Shop or Home. Press OK/u to confirm your selection and enter the last step.
In this step, you can press OK to exit the initial setup. The channels are arranged in a preset order. If
you wish to skip channels, modify the preset order or rename channels, select Setup > Organiser and
press OK/u to enter. In this step, you can also press t to return to the previous step.
4.2 Performing an automatic channel search
This section describes how to search and store channels automatically. Instructions are for both
analogue and digital channels. This may be done in any of the cases below:
you have selected Skip scan in the initial setup
you see “Please scan channels!” in TV mode
you want to update your channels.
Press Menu on the remote control and select Setup > Language > Menu language. Press t u to select
your desired menu language.
Press Menu to return to Setup. Press p q to select Country, then press t u to select your country.
The TV installs and arranges channels according to your country. At this step, you will be requested to
enter your password.
Press p q to select Tuner mode, then press t u to select Antenna or Cable.
Then follow a) or b) below.
a) If you have selected Antenna.
Press p q to select Channel install, and press OK/u to enter.
Select Automatic search (Fig. 7) then press OK/u to display Automatic search.
Press OK to skip the country selection and enter the next step. Or use t u to reselect your
country, then press OK to enter.
Select Digital & Analogue or Digital or Analogue, then press OK/u to start the automatic search,
which relates to all DVB-T digital and/or analogue channels.
b) If you have selected Cable.
Press p q to select Channel install, and press OK/u to enter.
Select Automatic search, then press OK/u to display Automatic search.
Press OK to skip the country selection and enter the next step. Or use t u to reselect your
country, then press OK to enter.
If you select Digital & Analogue, then press OK/u to enter. Select your scan mode if available
and configure proper cable information in the same way as in initial setup. Press p q to select
Scan and press OK/u to start your automatic search relating to all DVB-C digital and analogue
channels.
If you select Digital, then follow the same process as above to start your automatic search
relating to all DVB-C digital channels.
If you select Analogue, then press OK/u to start your automatic search relating to all analogue
channels.
The search may take a few minutes. During the process, you can press Menu to abort halfway.
Once the automatic search ends, press Menu to return to the previous step or press OK to restart
your channel search.
10
PART 1
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 55FY4002N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 55FY4002N in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info