751405
6
Zoom out
Zoom in
Previous page
1/26
Next page
1.0 IMPORTANT INFORMATION
1.1 Safety
Ensure that your domestic mains supply voltage matches the voltage indicated on the identification
sticker located at the back of your set. Where the mains plug or an appliance coupler is used as
disconnect device, it shall remain readily operable.
On certain models, the light indicator is located at the side of the TV set. The absence of a light
indication at the front does not mean that the TV set is fully disconnected from the mains. To
disconnect the TV set completely, the mains plug must be pulled out. The TV set’s components
are sensitive to heat. The maximum ambient temperature should not exceed 35 º Celsius. Do not
cover the vents at the back or sides of the TV set. Leave sufficient space around it to allow adequate
ventilation. Install the appliance away from any source of heat (fireplace, etc.) or appliances creating
strong magnetic or electric fields. Moisture in rooms where the set is installed should not exceed
80% humidity. Moving the set from a cold place to a warm one can cause condensation on the
screen (and on some components inside the TV set). Let the condensation evaporate before
switching the TV set on again.
WARNINGS
This appliance is intended for domestic household use only and should not be used for any
other application, such as for non-domestic use or in a commercial environment.
If the external flexible cable or cord of this product is damaged, it shall be replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Leave more than 10cm clearance around the television to allow adequate ventilation. The
ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc.
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases shall be placed on the apparatus.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Equipment with this symbol is a Class II or double insulated electrical appliance. It has
been designed in such a way that it does not require a safety connection to electrical
earth.
To prevent the spread of fire, keep candles or other open flames away from this
product at all times.
WARNING: To prevent injury, this apparatus must be securely attached to the floor/
wall in accordance with the installation instructions.
CAUTION: Connect headphones with the volume set low and increase if required.
Prolonged listening through headphones at high volume settings can
result in hearing damage.
2
PART 1
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 55FY4002N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 55FY4002N in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info