480584
11
Zoom out
Zoom in
Previous page
1/21
Next page
8
PART 1 • English
Group Rename
In this menu you can change the name of favourite groups. Use the pq buttons to select Group
Rename and press OK to enter.
1. Select a group with pq and press OK.
2. Use the pqtu buttons to navigate the on screen keyboard. Highlighted characters
can be inserted by pressing OK. After entering the desired group name, highlight OK
at the keyboard to confirm.
3. Press EXIT to cancel the group rename.
5.2 Installation
5.2.1 Auto Scan
1. Use the pq buttons to select Installation and press OK to enter menu.
2. Use pq to select Auto Scan and press OK to enter the menu.
3. Change the Scan Mode with tu select Free for searching Free To Air channels only or
All for all channel search.
4. Use pq to highlight Action and select Reinstall to create a new channel list or Update
to update the current channel list with newly found channels.
5. Use pq to highlight Search and press OK to start auto scan.
5.2.2 Channel Scan
1. Use the pq buttons to select Installation and press OK to enter the menu.
2. Select Channel Scan with pq and press OK to enter.
3. Use the tu buttons to select the desired Scan Modes – By Channel or By Frequency.
4. When By Channel is selected use the cursor buttons to select Scan Band and Channel
No.. When By Frequency is selected use the cursor buttons to select Frequency and
Bandwidth. Set Network Search to ON or OFF, highlight Search and press OK to
start scanning. Found channels will be stored and the receiver will switch to the first
channel in the list.
5.2.3 Antenna Setting
1. Press MENU to enter main menu.
2. Use the pq buttons to select Installation and press OK to enter the menu.
3. Select Antenna setting with pq and press OK to enter.
4. Use the tu buttons to change the setting. If On is selected, the receiver will provide
5V antenna power (for active antennas).
5. Press EXIT button to exit.
5.2.4 LCN Mode
If LCN (Logical Channel Numbering) is activated and LCN signal is provided by the operator,
channels will be stored in operator defined order. You can activate/deactivate the LCN function by
setting the LCN Mode to ON or OFF.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 5303 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 5303 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 5303

Strong SRT 5303 User Manual - German - 25 pages

Strong SRT 5303 User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info