480532

Strong SRT 5222 Manual

13
Zoom out
Zoom in
Previous page
1/21
Next page
PART 1 • English
10
GMT Usage: This menu is used for usage of GMT.
The options are: Off / User Define / By Region
GMT Offset: This menu is valid only when selected “User Define” in GMT
Usage menu. The GMT offset range is “-11:30 ~ +12:00”,
increasing by half hours progressively.
Date/Time: “Date” and “Time” menus are valid only when selected “Off” in
GMT Usage menu. Press OK then numeric button to change the
date and time.
Time Display: This menu allow to control whether the time is displayed on
screen or not. The options are: Off/On.
5.3.4 Timer Setting
In this menu you can set a programme timer or sleep timer.
Programme timer
Timer Number: You can set 8 timers
Timer Mode: Off/Once/Daily/Weekly/Monthly
Timer Service: TV Service/Radio Service
Wake-up Channel: You can select a desired channel as wake-up channel.
Month/Date/Day: Press pq buttons to select your desired month, date and day.
Time: Press OK to input the time with the numeric buttons.
Duration: Press OK to input desired duration with the numeric buttons.
Auto Record: Use tu to adjust ON or OFF, depending if you want the timer to
activate recording via USB device.
Quitting the programme timer, a saving window appears, select Yes in the confirmation
window with tu and press OK to save or select No to cancel.
Sleep Timer
You can set the receiver to switch to Standby in 10, 30, 60, 90 and 120 min automatically.
Additionally there is shown the value of remaining time Remains: HH:MM
5.3.5 OSD Setting
This menu allows you to change settings for: Subtitle Display, OSD Transparency, and
Load Default OSD Setting.
Subtitle Display: To set the subtitle to DVB, Teletext or OFF.
OSD Timeout: To set the desired duration for banner display from 3 ~ 10 s.
OSD Transparency: To set the OSD transparency from Off ~ 50 %.
Load Default OSD Setting:
To clear all OSD settings and reset to default value.
5.3.6 Parental Lock
This menu allows you to protect the installation menu, or channels with a password
and you can change the Password. If you want to enter the menu you will be asked to
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 5222 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 5222 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info