PART 1 • English
4
Where the mains plug or all — pole mains switch is used as the disconnect device, the
disconnect device shall remain readily operable.
Remote control transmits a directional infrared beam. Ensure to aim the remote
control directly at the infrared sensor of the unit during operation. If the sensor has
been covered or there is a large object between the RCU and sensor or it is exposed to
direct sunlight or a strong artificial light (fluorescent or strobe light) the sensor may
not be able to receive the remote signal. In this case, change the direction of the light
or reposition the unit.
1.2 Storage
Your receiver and its accessories are stored and delivered in a packaging designed to
protect against electric shocks and moisture. When unpacking it, make sure that all the
parts are included and keep the packaging away from children.
When transporting the receiver from one place to another or if you are returning it under
warranty make sure to repack the receiver in its original packaging with its accessories.
Failing to comply with such packaging procedures could void your warranty.
1.3 Equipment Set-up
We recommend you consult a professional installer to set up your equipment.
Otherwise, please follow these instructions carefully:
n Refer to the user manual of your TV and your antenna.
n Make sure that the SCART cable and outdoor components of the antenna
are in a good condition and the SCART connections are well shielded.
This manual provides complete instructions for installing and using this receiver.
The following symbols will serve as follow.
WARNING Indicates warning information.
Tips Indicates any other additional important or helpful information.
MENU Represents a button on the remote control. (Bold Character)
Move to Represents a menu item within a window. (Italic Character)
1.4 Accessories
n 1 User Manual
n 1 Remote control unit
n 2x Batteries (AAA type)
Note: The batteries should not be recharged, disassembled, electrically short-
circuited or be mixed or used with other types of batteries. If rechargeable
accumulators instead of batteries are going to be used, we recommend
using (e.g. NiMH) types with low self-discharge to ensure long time
operation of remote control.
