424428

Strong srt 4356 pvr Manual

16
Zoom out
Zoom in
Previous page
1/74
Next page
Part 1 • English
www.strongsat.com 29
5.1.5 Games (Please see inside cover Screen 22)
If you want to play a game, apply the following steps:
1. Press the menu button on your remote.
2. Using UP/DOWN keys on your remote, select "Games" and press OK.
3. Using UP/DOWN keys on your remote, select the game you want to play and
press OK.
z Tetris (Please see inside cover Screen 23)
1. Enter the level (1-15) you want to play using the [0-9] numeric keypads and press
OK. The game will start automatically.
2. Left/Right button: Move the block to the left or right direction
3. Down button: Makes the block Drop
4. OK: Rotates the block
5. Press the Exit button to stop the game.
z Snake (Please see inside cover Screen 24)
1. Press any button to start the game
2. Left/Right button: Move snake to a left or right direction.
3. UP/DOWN: Move snake to up or down direction.
4. If the snake eats a green square, the snake grows.
5. If the snake hits a red square, the game is over and the game will automatically
come up with a new game screen.
6. Press the Exit button to stop the game.
z Sokoban (Please see inside cover Screen 25)
1. Use Up/Down, Left/Right buttons to move icon of longshoremen.
2. Your task is put to put all balls in the right places.
3. Use Red button to restart level
4. Use Blue button to Undo
5. Use Green button to return to previously level
6. Use Yellow button to go to the next Level
Part 1 • English
30 www.strongsat.com
5.1.6 Common Interface (Please see inside cover Screen 26)
Insert a Common interface Module (CAM) in one of the two Common Interface Slots,
situated behind the lid at the front of your receiver.
1. Press the menu button on your remote.
2. Using UP/DOWN keys, select "Common Interface" and press OK.
3. Select the position of the slot you have put your CAM in, Top or Bottom, and press
OK.
4. The receiver will display the message "Wait!" while it is initializing the CAM.
5. If the message disappears, the CAM is ready for use.
6. Press the Exit button until you go back to the main menu
ON SCREEN CHANNEL INFORMATION (Please see inside cover Screen 27)
When you start up your receiver, or when you are changing channels, there will be an
information banner at the top of your screen for a few seconds, showing you the
information about the channel you selected. When you are watching TV you can call
for this information by pressing the FUNC button. The banner at the bottom of the
screen will appear if you press the FUNC button twice, and will give you information
about the satellite and the signal strength.
6.0 Personal Video recording (PVR)
This section describes the functions used to record programs on your receiver's Hard
Disk Drive (HDD).
6.1 How to Record
There are three methods of recording programs on your HDD:
l. Normal Recording: You can view a program and record it at the same time.
2. Timer Recording: You can automatically set the starting and ending time for
recording of the desired channel.
3. TimeShift Recording: When you get interrupted from watching a program, you
can replay the missed part of the program.
By default, the recorded filename would be the same as the EPG event's name.
If EPG is not present, the recorded filename would be the same as the current channel
name.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong srt 4356 pvr at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong srt 4356 pvr in the language / languages: English, German, Italian as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info