424398
25
Zoom out
Zoom in
Previous page
1/35
Next page
25
6.8. DISEQC 1.2 SETUP-MENÜ
Das Menü .DiSEqC 1.2 Setup. befindet sich in dem
übergeordneten Menü Antenna Installation. Bevor Sie das
Menü .DiSeqC 1.2 Setup aufrufen, wählen Sie zunächst im
Menü .Antenna Installation. den Satellitennamen und
seine Eigenschaften (Polarisation, Frequenzband) aus.
Das Einrichten der Parameter Polarisation und 22 kHz im
Menü Antenna Installation ist optional. Die Polarisation ist
standardmäßig auf H/V (sowohl horizontal als auch
vertikal) eingestellt und 22 kHz ist auf Auto gesetzt (22 kHz
Off/On). Diese Parameter können so belassen werden, um
die Installation zu vereinfachen. Das Ziel ist die
Rotorbewegung auf der Polachse unter Beobachtung des
Indikators Signal Quality (Signalqualität). Wenn der
Empfänger auf einen Satelliten ausgerichtet wird, steigt die
Anzeige der Signalqualität an. Wenn Sie mit der
Signalqualität zufrieden sind, speichern Sie die aktuelle
Antennenposition. Anderenfalls führen Sie eine
Feinabstimmung durch, bis die gewünschte Intensität
erreicht ist.
Im Receiver sind bereits eine Reihe von Satelliten
vorprogrammiert. Diese Satelliten sind mit Namen
aufgeführt (z.B. Astra, Hotbird, usw.). Für vorprogrammierte
Satelliten brauchen Sie keine Referenz-Transponder
einzugeben, obwohl dies grundsätzlich für alle Satelliten
möglich ist. Die Abbildung zeigt den oberen Bereich des
Menüs DiSEqC 1.2 Setup.
Satelliten ohne Vorprogrammierung sind mit .User 1., .User
2. usw. bezeichnet. Hier sollten Sie Frequenz, Symbolrate
und Polarisation eines Referenz-Transponders eingeben,
damit das Gerät auf den Satelliten abgestimmt wird.
Die beiden Hauptparameter Frequency und Polarisation
des Referenz-Transponders werden entsprechend der
Antennenparameter eingestellt (s. Abb. 6.8.3). Wenn die
Polarisation im Menü Antenna Installation auf Vertical
eingestellt ist, wird sie auch im Menü DiSEqC 1.2 Setup.
automatisch auf Vertical gesetzt. Diese Einstellung lässt
sich nicht ändern. Das Gleiche gilt für die Einstellung
Horizontal.
Die Polarisation sollte im Menü Antenna Installation auf H/
V gesetzt werden, damit der Wert im Menü DiSEqC 1.2
Setup eingestellt werden kann. Die Frequenzwerte werden
gemäß 22 kHz-Modus eingestellt. Im Modus 22 kHz Off
(Low Band) reicht der Frequenzbereich von 10700 bis
11900. Für 22 kHz On (High Band) liegt er zwischen 11550
und 12750. Wenn 22 kHz auf Auto eingestellt ist, können
Sie einen Wert aus dem gesamten Bereich zwischen
10700 und 12750 eingeben. Bei Eingaben außerhalb des
eingegebenen Frequenzbereichs wird eine Warnmeldung
angezeigt.
Im folgenden Abschnitt sind die Funktionen des DiSEqC
1.2-Rotors beschrieben.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong srt 4120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong srt 4120 in the language / languages: German as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong srt 4120

Strong srt 4120 User Manual - English - 35 pages

Strong srt 4120 User Manual - Spanish - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info