751407
18
Zoom out
Zoom in
Previous page
1/26
Next page
5.12.1 Enabling or disabling T-Link
Press Menu on the remote control, then select Options > T-Link.
Press t u to select On or Off, if this function is turned on, T-Link option will be available in the Quick
access menu which you can enter by pressing the Option button on the remote control.
5.12.2 Using one-touch play
With one-touch play, pressing the play button on (for example) your DVD remote control starts
playback on your DVD device and automatically switches your TV to the correct source, displaying
DVD content.
5.12.3 Using system standby
With system standby, pressing the q button on (for example) your TV remote control switches your
TV and all connected HDMI devices to standby mode.
NOTE: Guide Menu will be available in the sublist of T-Link option when T-Link
function is turned on and CEC devices are connected. With this function,
you can operate CEC devices with a virtual on-screen controller and the TV
remote control.
NOTE: The CEC functions depend on the devices connected and it is possible that
some devices may not interoperate correctly when connected to this TV.
The user manual or the manufacturer of the problematic devices should be
consulted for further information.
5.13 Common interface
Encrypted digital TV channels can be decoded with a common interface module and a card provided
by a digital TV service operator.
The common interface module may enable several digital services, depending on the operator
and services you choose (for example, pay TV). Contact your digital TV service operator for more
information about services and terms.
5.13.1 Using the common interface module
WARNING: Switch off your TV before inserting a common interface module. Be sure
to follow the instructions described below. Wrong insertion of a common
interface module may damage both the module and your TV.
Following the directions printed on the common interface module, gently insert the module into the
common interface slot on the TV.
Push the module in as far as it will go.
Turn on the TV and wait for the common interface function to be activated. This may take several
minutes.
14
PART 1
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 40FY4002N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 40FY4002N in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info