751410
21
Zoom out
Zoom in
Previous page
1/22
Next page
Problem Possible cause and solution
Any other reception or
signal related problems
1. Generally cables might have loosened. Moisture might
have entered into cables or connectors.There is heavy rain
or heavy storm at present (DVB-S/S2 and -T/T2). Check the
cable connections. DVB-S/S2 and -T/T2: Check all equipment
connected between the reception point and the TV.
Wait until heavy rain/thunderstorm passed. If no solution ask a
local satellite specialist for advice.
2. DVB-S/S2: The satellite dish is NOT aligned to the (correct)
satellite(s). Ask a local satellite specialist for advice.
3. DVB-S/S2: Satellite dish is too small. Trees or buildings are in
path. Ask a local satellite specialist for advice.
4. DVB-S/S2: Signal is too strong, maybe need to be atennuated.
Ask a local satellite specialist for advice.
No colour
1. Devices are not properly connected (scart, RCA sockets) or
wrong/bad cables are used.
2. Adjust the saturation.
3. Switch TV on another channel. It is possible that the current
programme is broadcast in black and white.
No picture, normal sound
1. Adjust the brightness and contrast.
2. Radio channel is tuned to or the programme is not transmitting
Video signals or another broadcasing interference/failure.
Normal picture, no sound
1. Press the volume up button to increase the volume level.
2. Audio is muted, press ! to restore the sound.
3. If external devices are used to loop the sound through, make
sure to select correct sources and correct sound mode, for details
also check advices in User Manuals from connected devices
4. Maybe a channel w/o audio is tuned to (demo) or the
programme is not transmitting audio signals or there is some
other transmission interference/failure.
Playback of video is
causing picture freeze/
macro blocks or similar
distortion, especially on
HD content.
Read/write speed of your USB device could be too low. Make sure to use
a USB storage device with sufficient speed and space. Pen drives (USB
sticks) may not support sufficient speed.
The remote control does
not work
1. Change the batteries. If you're using rechargable ones take care
to use such with low self-discharge
2. The batteries are not installed correctly or the types have been
mixed
3. IR Sensor is blocked or maybe interfered from bright light
The TV switches off after a
certain time
Switch ON the TV and check settings for automatic STBY function, by
default the TV switches OFF after 4 hours to fulfil European low power
regulations and help you to save energy.
NOTE: If the problem persists after these solutions, please contact your local
support centre or send a support mail via our website www.strong.tv.
17
English
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 40FB4013N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 40FB4013N in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 40FB4013N

Strong SRT 40FB4013N User Manual - German - 27 pages

Strong SRT 40FB4013N User Manual - Dutch - 23 pages

Strong SRT 40FB4013N User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info