751408
13
Zoom out
Zoom in
Previous page
1/26
Next page
4.0 INSTALLING CHANNELS
4.1 Initial setup
Initial setup involves selecting all the settings required to be able to search for and store all the
analogue and digital channels you can receive.
Make sure that the television is switched on and follow all the steps in turn specified hereafter.
NOTE: If the channel search retrieved only the analogue channels it could
be caused by poor broadcasting and therefore is not covered by
manufacturer warranty. Manufacturers cannot be held responsible for lack
of or poor broadcasting in some areas.
The first time you switch the set on, the Initial setup wizard opens, which guides you through the
initial setup process.
Fig. 6
Press p q to select your language, then press OK/u to enter the next step.
Press p q to select your country, then press OK/u to enter the next step.
NOTE: If you select France, you will have to enter the Password setting menu
here in order to set a password. Use the 0 ~ 9 buttons to enter a four-digit
number for your password. (0000 is too simple to be set as your password.)
Re-enter the same code to confirm the password. After that, you will enter
the next step automatically. (In this step, you can only press t to return to
the previous step.)
Press p q to select your tuner mode Antenna or Cable.
Then follow a) or b) below.
a) If you have selected Antenna.
Press OK/u to enter.
Press p q to select Digital & Analogue or Digital or Analogue, then press OK/u.
Press p q to select Scan, then press OK/u to start the automatic search for all DVB-T digital
and/or analogue channels.
b) If you have selected Cable.
Press OK/u to enter.
Press p q to select Digital & Analogue or Digital or Analogue.
If you select Digital & Analogue, press OK/u to enter. Then:
Press p q to select Scan, then press OK/u.
Press t u to select the scan mode if available (Full or Advanced).
If you select Full, press OK to start the automatic search for all DVB-C digital and/or
analogue channels.
If you select Advanced, use the 0 ~ 9 buttons to adjust the values for frequency, symbol
rate, network ID, and use t u to select the modulation mode; then press OK to start the
search for all DVB-C digital and/ or analogue channels.
If you select Digital, press OK/uto enter, then follow all the same steps as for Digital & Analogue
above, to search for all DVB-C digital channels.
If you select Analogue, press OK/u to enter, pressp q to select Scan, then press OK/uto start
the search for all analogue channels.
9
PART 1
English
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 32HY4002N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 32HY4002N in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info