751404
13
Zoom out
Zoom in
Previous page
1/23
Next page
3.0 FIRST TIME INSTALLATION
After all connections have been made properly, switch on your TV. The language selection will appear
on screen. Use p qt u to select the OSD Language of your preference. Confirm with ENTER on your
remote control.
Then select the country. Use pqt u to select the Country of your preference. Confirm with ENTER on
your remote control.
The next screen appears with the tuner selection. Choose the one you like to use.
Scan type Select which input source you want to use: DVB-S to receive satellite
broadcasts (and if you are equipped with a satellite dish), DVB-T to receive
terrestrial broadcasts or DVB-C to receive cable broadcasts.
3.1 DVB-S installation
Satellite Setting
Press p q to highlight the satellite your dish is aimed at. The signal quality bar on the bottom of the
screen allows you to fine tune the alignment of your antenna for optimum reception. Adjust your
antenna for maximum possible signal quality. When the signal cannot be improved anymore, fix the dish
on this position and press the BLUE Scan button to continue.
Channel Search
Press p q t u to highlight the options of choice and press ENTER to start the channel search.
Scan Mode Choose between Auto Scan (recommended), Blind Scan and Network
Crypted Select FTA Channels to search Free-To-Air channels only or All Channels to search FTA
and Encrypted channels
Service Type Select DTV to search DTV channels only, RADIO to search radio channels only or All for a
complete search.
It is recommended to use the default settings.
3.2 DVB-T installation
Terrestrial Setting
First select the Tune Type by pressing t u to select DVB-T, ATV or DVB-T+ATV (DVB-T to search digital
broadcasts and ATV to search analogue broadcasts). Press q to continue. Press p q t u to highlight
the country that you want to install, then press ENTER to start searching.
NOTE: If you have an active antenna, turn it on by following the instructions in
paragraph 5.4.5 and then repeat the scan.
3.3 DVB-C installation
Cable Setting
First select the Tune Type by pressing t u to select DVB-C, ATV or DVB-C+ATV (DVB-C to search digital
broadcasts and ATV to search analogue broadcasts). Press q to continue. Press p q t u to highlight
the country that you want to install, then press ENTER to start searching.
9
English
English
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 32HX4003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 32HX4003 in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 32HX4003

Strong SRT 32HX4003 User Manual - German - 27 pages

Strong SRT 32HX4003 User Manual - Dutch - 22 pages

Strong SRT 32HX4003 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info