751365
13
Zoom out
Zoom in
Previous page
1/32
Next page
LNB Type Highlight this item and press OK to select between available types, according
to your LNB for selected satellite.
22kHz Tone Set Auto for most of cases, especially Universal LNB.
Toneburst Keep None if there are no Tone Burst switch in your antenna system.
Otherwise, set accordingly to the physical antenna conguration.
DiSEqC 1.0 Keep None if there are no DiSEqC 1.0 switch in your system. Otherwise, set
port according to the physical antenna conguration.
DiSEqC 1.1 Keep None if there are no DiSEqC 1.1 switch in your system. Otherwise, set
port according to the physical antenna conguration.
Signal Strength and Quality indicators will help you to verify that signal from selected satellite/
transponder is of good quality.
Make settings for each satellite available in your antenna system.
Once you have completed all settings of LNB(s) - press to continue installation of satellite channels.
Channel Search
On next screen you can select between Auto Tuning and DTV Manual Tuning.
Auto Tuning
Search Type If you select Satellite then the TV will scan all transponders of Selected
Satellites. If you select Transponder then the TV will scan Selected
Transponders of selected satellite.
Satellite Highlight this item and press OK to display list of satellites. Mark in the list
satellites which you would like to scan automatically. The item would not be
selectable if Search Type set to Transponder.
Transponder Highlight this item and press OK to display list of transponders. Mark in the
list transponders which you would like to scan automatically. The item would
not be selectable if Search Type set to Satellite.
Scan Mode Select between Free to install only free channels, Free+Scramble to install free
and scrambled channels, Scramble to install only scrambled channels.
Service Type Select between DTV to install only Digital TV channels, DTV+Radio to install TV
and Radio channels, Radio to install only Radio channels.
Network Search Set to O to scan only transponders preinstalled in TV set. Set to On to scan
transponders which can be discovered through network signaling.
Search Option Set to Auto Scan for scanning according to above all settings. Set to Blind
Scan for scanning in case of your selected satellite is not well dened. Blind
scan mode searching transponder by special algorithm which make possible
to discover new transponders. However, this search option is very time
consuming.
Once you have done all settings - select Search and press OK.
Manual DTV tuning.
This mode allows you to install channels from one transponder of selected satellite.
All search modes are similar to described in above chapter Auto scan.
TV set will search for channels and switch to rst channel in the list at the end.
Enjoy watching Digital TV!
9
English
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 32HB5203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 32HB5203 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 32HB5203

Strong SRT 32HB5203 User Manual - English - 32 pages

Strong SRT 32HB5203 User Manual - German - 25 pages

Strong SRT 32HB5203 User Manual - Dutch - 22 pages

Strong SRT 32HB5203 User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info