751363
11
Zoom out
Zoom in
Previous page
1/22
Next page
Put 2x AAA batteries in the compartment and make sure the polarity is correct.
Slide horizontally to close the cover.
Precautions for using the battery
Improper using of the battery will cause leakage. Carefully follow these instructions.
Please note the batteries' polarity to avoid short circuit.
When the battery's voltage is insufficient which affect the use range, you should replace it with
a new battery. Remove the batteries from the remote control unit if you do not intend to use it
for a long time.
Do not use different types of batteries (for example Manganese and Alkaline batteries) together.
Do not put the battery into fire, and charge or decompose the battery.
Please dispose batteries abide by relevant environmental protection regulation.
1.11 Using the remote control
Use the remote control by pointing it towards the remote sensor. Items between the remote
control and the remote sensor could block normal operation.
Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote
control, also do not put the remote control in a high humidity place.
Do not place the remote control under direct sunlight which will cause deformation of the unit
by heat.
When the remote sensor is under direct sunlight or strong lighting, the remote control will not
work. If so, please change the lighting or TV's position, or operate the remote control closer to
the remote sensor.
3.0 FIRST TIME INSTALLATION
After all connections have been made properly, switch on your TV. Insert the main power plug into the
wall outlet, now the red LED light should light up. Press the q button on your remote control to wake
the TV up. The language and country selection will appear on the screen. Use t u to select the OSD
Language of your preference. Use pq to select the Country and use t u again to select the region you
are using this TV. This country/region selection is an important setting, it will set the time zone and will
try to sort region channels at first or in a specific order.
If all settings are made, confirm with OK on your remote control and follow the next steps.
On the next screen, you can select which tuner you like to use and which channels you'd like to search
for. Choose Tuner Type and by pressing t u you can choose between DTV, ATV or DTV + ATV (DTV to
search digital broadcasts; ATV to search analogue broadcasts). After you made your selection, press q to
proceed to Digital type. In this menu you can select which input source you would like to use:
Satellite to receive satellite broadcasts (if you are equipped with a satellite dish)
DVB-T to receive terrestrial broadcasts (by using indoor or outdoor antenna)
DVB-C to receive cable broadcasts. (Connection to cable outlet box)
Then the next screen appears depending from the tuner selection you choose.
1.12 DVB-S/S2 installation
Satellite Setting
Press t u to select the satellite your dish is aimed at. Use the t u pq buttons to change settings for
your satellite installation for each specific satellite.
7
English
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 32HB3003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 32HB3003 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 32HB3003

Strong SRT 32HB3003 User Manual - German - 25 pages

Strong SRT 32HB3003 User Manual - Dutch - 23 pages

Strong SRT 32HB3003 User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info