750857
12
Zoom out
Zoom in
Previous page
1/25
Next page
A search will be executed, this may take some time. A message will be show when finished.
NOTE Wrong region or provider selection can lead to missing channels or channels being stored at
wrong positions in the channel list. The search can be stopped anytime by pressing . From
the main menu Installation, more options are available to do different scan types. See chapter
4.1 DVB-C Installation.
TIP If the Welcome menu does not appear after switching on the receiver the first time, reset the
receiver to factory settings by pressing the MENU button and selecting Load Factory Setting
in the submenu Tools. DEFAULT PIN: 1234.
4.1 DVB-C Installation
Select Installation and press OK to enter the installation menu. Press p/q tu to select Channel Scan or Auto Scan.
Strength and Quality bars are available in each submenu, to provide information about signal presence. Network ID
(NID) and other technical data can be found on the website of your “Provider” (Broadcaster, cable network/your local
cable system) usually.
4.1.1 Channel Scan
Select Channel Scan and press OK to enter the Channel Scan menu. Press pq t u to set Scan mode, Channel No.,
Frequency, Symbol Rate, Scan QAM and Network Search. Highlight Search and press OK to start the channel scan. If you
are missing channels, we recommend to obtain technical data about the cable operator's base channel and start a
Network search from there to find all channels belonging to the network.
4.1.2 Auto Scan
Select Auto Scan and press OK to enter the Auto Scan menu. Press p/q tu to set Country and Network and then
highlight Search. Press OK to start the auto search.
Some operators in Germany are pre-installed.
4.1.3 Network ID scan
Select Network ID scan and press OK to enter the menu. Press pq t u to set Frequency, Symbol Rate, Scan QAM and
Network ID. Obtain technical data about your cable provider's base channel and Network ID from your provider and
start a Network ID scan from there to find all channels belonging to the network corresponding to the Network ID.
Highlight Search and press OK to start the search.
4.1.4 LCN
If LCN (Logical Channel Numbering) is activated and LCN is provided by the operator, channels will be stored in an
provider defined order. Set LCN to On to activate the provider defined channel numbering or Off to store channels
in the found order. This function only applies when a new channel search and only to Channel Scan and Auto Scan
options.
4.1.5 Free/All channels
If Free/All channels is set to Free, only channels will be stored that are signalled as Free-to-Air. Set to All to store all
channels found. This function only applies when a new channel search is performed and only to Channel Scan and
Auto Scan options. Note: Scrambled channels cannot be viewed with this receiver.
5.0 QUICK GUIDE TO USING YOUR RECEIVER
We at STRONG understand that you can’t wait to enjoy your digital HD cable receiver. The following quick guide will
make you familiar with the basic operation of this device. We do, however, advice you to read the full manual to get the
best performance from your receiver.
8
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 3002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 3002 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 3002

Strong SRT 3002 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info