751403
17
Zoom out
Zoom in
Previous page
1/23
Next page
Satellite Select the satellite for this TV.
LNB Type Make sure the LNB type is corresponding to your dish.
LNB Power: Set the power supply for the LNB (usually 13/18 V).
22KHz Select the 22KHz to set 22K switch to ON/OFF. The Auto mode (recommended) is
used to switch 22KHz on or off depending on the LNB type.
DISEqC1.0/1.1 Select the DiSEqC mode for the selected LNB.
Highlight Satellite and press ENTER to access the satellite list and select one. Highlight LNB Type and
press ENTER to select the LNB type. Make sure the 22KHz, DISEqC1.0/1.1 switch is corresponding to the
selected satellite. After the above steps are finished, press the BLUE button to search for channels.
5.4.3 DTV Manual Tuning (in DVB-T/C mode only)
Search and store programmes manually.
Select the source type DVB-T or DVB-C and search digital programmes manually. In the Channel menu,
select DTV Manual Tuning and press ENTER to access. Press t u to select a Channel No., and then press
ENTER to start the search. The search stops when a programme is found and this programme will be
stored in the current channel position. If you want to stop the search, press MENU.
5.4.4 ATV Manual Tuning (in DVB-T/C mode only)
First select the source type of ATV. Then in the Channel menu, select ATV Manual Tuning and press
ENTER to access. Highlight and press p q to select Storage To 1 (maybe other number), Sound System
and Channel No.. Then select search and press ENTER to start the search. Press u for the unit to search
towards higher frequency. Press t for the unit to search towards lower frequency. The search stops
when a programme is found and this programme will be stored in the current channel position. If you
want to stop the search, press MENU.
Fine-Tune
Use this option to make small adjustments to tuning of an individual channel. Fine-tune is not
necessary under normal conditions. However, in area of inferior broadcast conditions where adjustments
is necessary for a better picture and sound, use fine-tune. Select a channel that you want to fine tune. In
the Channel menu, select ATV Manual Tuning and press q to highlight Fine-Tune. Press t u to fine tune
until the best possible picture and sound are obtained.
5.4.5 Channel settings
Programme Edit Edit the programmes. You can press the COLOUR BUTTONS on the remote
control to skip programmes, rename and delete programmes or move
programmes, and add programmes to the favourite list by pressing FAV.
Signal Information Showing the information of current DTV channel.
Cl information Enables the user to select from the CAM-provided menu. Select the Cl menu
based on the menu PC card.
5 V Antenna Power This option is only available in DVB-T source, select On to supply power for
the TV’s antenna. Select Off to turn off this function.
Software Update (OAD) Select On to allow the TV to update the system software over the air. Select
Off will turn off this function.*
OAD Tuning When software update (OAD) is off, this option is disabled. By selecting OAD
scan you can scan channels to find the OAD update information.*
*Only for some regions.
13
English
English
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 24HX4003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 24HX4003 in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 24HX4003

Strong SRT 24HX4003 User Manual - German - 27 pages

Strong SRT 24HX4003 User Manual - Dutch - 22 pages

Strong SRT 24HX4003 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info