751396
21
Zoom out
Zoom in
Previous page
1/23
Next page
1.22.5 Software update via USB
From time to time you can check if there is an improved software version available. This can be viewed
and downloaded from our website www.strong.tv. Search the model number on our website's service
support section. If there is an improved software version you can download the file and copy it to the
root of a USB device. Then press pq button to select Software Update (USB) from the SETUP menu on
your TV. Afterwards plug your USB device into the USB slot and pressENTER to update the respective
software. Confirm with Yes using t u. When the update is completed, remove the USB stick, disconnect
your device from the main power supply and plug in again.
7.0 TROUBLESHOOTING
There maybe various reasons for abnormal operation of your TV set. Check your TV set according to
the general procedures shown below. Additionally, we strongly recommend reading the detailed
troubleshooting of your TV set in the full user manual available on our website www.strong.tv. If your TV
set does not work properly after checking the general and detailed troubleshooting, please contact your
dealer, the local Service Hotline, or send an email to our support via www.strong.tv. DO NOT try to open
or disassemble your TV set. It may cause a dangerous situation and the warranty will be void.
Problem Possible cause and solution
The LED/Standby indicator
does not light up
1. Check whether the power connector is completely plugged at
the TV and into power socket.
2. Make sure that the switch on multipoint connectors is
switched ON as well.
3. The electrical outlet may be damaged.
4. STBY LED is defective.
No Signal 1. The TV is not connected to a signal source (DVB-C, DVB-S/S2
or DVB-T/T2) or the antenna (terrestrial or satellite antenna)
is maybe not aligned correctly respectively the according
connection and distribution equipment might show
malfunction, incompatibility or defectives.
2. DVB-T/T2: Active antennas need antenna power switched ON
or external power connected.
Antenna is maybe out of digital signal reception in your area. Check
reference from service providers about coverage.
3. DVB-S/S2: Incorrect values of some tuner parameters (e.g. one
or some channel(s) changed to another transponder or are no
longer emitted).
Incorrect values of LNB parameters.
The picture and sound
remain frozen, or macro
blocks or similar distortion
are visible on the screen.
DVB-S/S2,DVB-T/T2: The reception signal is too weak or disturbed by
electromagnetic, high-frequency, or other interference signals. DVB-T/
T2 : Disturbances caused by signal reflections.
DVB-C, DVB-S/S2: The connection cables at the signal source are too
long (too high attenuation).
DVB-T/T2, DVB-S/S2: The antenna is not properly adjusted or got
misaligned after storm etc.
17
English
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 24HC3023 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 24HC3023 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 24HC3023

Strong SRT 24HC3023 User Manual - German - 27 pages

Strong SRT 24HC3023 User Manual - Dutch - 23 pages

Strong SRT 24HC3023 User Manual - French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info