751645
14
Zoom out
Zoom in
Previous page
1/28
Next page
Select Next and confirm with OK to go to Step 2.
Step 2: Channel scan
Start Scan: Press OK to enter this menu which shows the options for channel
scanning. Selection of DVB-T/T2 Installation allows you to search
terrestrial channels by using an indoor or outdoor antenna. If you
selected DVB-S/DVB-C during the previous step parameter Tuner
Type, you will get the DVB-C Installation option which allows you
to search cable broadcasted channels. Select Satellite Installation
to search satellite channels of your choice by using a satellite dish
antenna.
Load channel list from USB: Select this option and press OK or u if you want to load a channel
list which has been made before and was saved as backup on a USB
stick.
Step 3: Channel Installation
DVB-T/T2 or DVB-C Installation The receiver shows the DVB-T/T2 or DVB-C Installation screen.
Satellite Installation: The receiver shows the DVB-S Installation screen. The default setting
is ASTRA 19.2 on DiSEqC port 1. Use pq if you would like to select a
different satellite signal and press OK to select or deselect. To modify
the settings, press u to enter. When all settings are finished, press
BLUE and select Scan to enter the scanning process menu. Select
options Scan, Scan type, Service type and Sat Type here. By selecting
Sat Type as Multi, you may scan multiple satellites, by selecting Single
you scan only one satellite signal. Press OK to start.
DVB-T/T2 or DVB-C Installation
Country (Region): To select the country where you are using the device to set up the
steps in the scanning process automatically.
Antenna Power: (Only for DVB-T/T2.) Switch to On if you use an active antenna. By
setting to On, 5 V will be present at the ANT IN connector of the
receiver. Select Off for passive antennas.
LCN: Switch to On if your operator uses automatic channel sorting also
called as LCN. This option does not allow any manual channel sorting
afterwards. Select Off if you would like to sort the channels yourself
after the scanning process.
Scan Type: Select All to store scrambled and Free-To-Air channels or select FTA to
store only Free-To-Air channels.
NOTE: Scrambled channels cannot be viewed with this receiver.
By the time all settings are finished, select Auto scan for full search of all channels or select Manual Scan
for only one frequency.
Press OK to start scanning.
The receiver will search for all available channels now.
When the scanning is finished, the receiver switches to viewing mode.
10
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 2402 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 2402 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 2402

Strong SRT 2402 User Manual - German - 32 pages

Strong SRT 2402 User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info