751645
11
Zoom out
Zoom in
Previous page
1/28
Next page
27. u/2 Turns Timeshift on or off in the DTV mode; starts/resumes playback in the
multimedia mode
28. Recording List in the DTV mode
29. 7 Fast rewind during playback
30. 5/6 Press and hold 5 6 for seconds to draw the playing progress as your desire,
then press u PAUSE] to start the playing from the new position.
31. NEXT Fast forward during playback.
2.5 Installing the batteries
Fig. 4
Open the cover on the remote control and insert 2x AAA batteries into the compartment.
The correct position of batteries polar diagram is shown inside the batteries compartment.
Open the cover.
Insert the batteries.
Close the lid.
WARNING: The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
3.0 CONNECTIONS
This chapter describes the basic satellite setup with 1 dish + 1 LNB and/or terrestrial or cable reception.
For advanced dish setup, refer to section 3.2.
3.1 Basic connection
a. If you use satellite reception, connect the LNB of your satellite antenna to the SAT IN connector of
your receiver using a good quality coaxial cable and suitable ‘F-connector’ plugs.
b. If you use terrestrial or cable reception, then connect the outdoor/indoor antenna or cable wall
socket to the ANT IN connector of your receiver using a good quality coaxial cable and suitable ‘IEC-
connector’ plugs.
c. Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the other
end to the HDMI input of your TV.
d. Connect the LAN cable from your router/Internet connection into the RJ45 LAN input.
e. Plug in the power plug from the 12 V adapter and insert the adapter into a suitable wall outlet.
3.2 Connecting multiple xed LNBs using a DiSEqC 1.0-1.1 switch
and/or motor control system (DiSEqC 1.2-1.3)
Fig. 5
a. Connect the output of your LNB's to the inputs of your DiSEqC switch or motor control system with a
high quality coaxial cable and well-shielded F connectors.
b. Connect the output of your DiSEqC switch or motor controller with the input of your Android IP box
(SAT IN) with a high quality coaxial cable and a well-shielded F connector
Please refer to the manual of your motor-drive for more detailed information.
7
English
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 2402 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 2402 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 2402

Strong SRT 2402 User Manual - German - 32 pages

Strong SRT 2402 User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info