780319
26
Zoom out
Zoom in
Previous page
1/44
Next page
26 27
Open live parts should only be maintained and
cleaned at a Stromer dealer!
Remove the battery before cleaning your
S-Pedelec. Ensure that the battery box is again
completely closed.
Ensure that you do not touch and thus possibly
connect contacts when cleaning the battery.
You risk being hurt and the battery may suffer
damage if the contacts are live.
Cleaning with a high-pressure cleaner may
damage the electrical system. The high pres-
sure might also push cleaning liquid into
sealed parts and thus damage them.
Avoid damage to cables and electrical compo-
nents. When this has happened, the S-Pedelec
must be deactivated until it has been inspected
by a Stromer dealer!
Switch off the electrical system, remove the
battery and close the battery box before perform-
ing any kind of work on your S-Pedelec.
Chain / Drive
Chain system
The drive chain must be regularly cleaned and
lubricated to ensure appropriate functioning (see
the “Deadlines and inspection work” section). Dirt
can be removed with the normal S-Pedelec wash.
Otherwise you can clean the chain by rubbing
it with an oily cloth. When the chain is clean, it
should be greased at the joints with suitable lubri-
cant. After being left to soak, the excess lubricant
should then be removed.
Chain tension
To ensure that the chain and gears can work safe-
ly, the chain must have a certain level of tension.
Otherwise it can come off and lead to a fall. Chain
gear systems tense the chain automatically.
Dirt and permanent strain wear the chain.
The chain should be replaced as soon as it can be
significantly lifted (approx. 5 mm) from the front
chain ring with your fingers.
Chain OK
Chain worn
Many modern chains for derailleur gear systems
no longer have chain connectors. Special tools
are required to open/exchange/close them. They
should be exchanged by a Stromer dealer.
Other chains are supplied/mounted with chain
joints. In some cases, these can be opened with-
out the need for tools. These chain connectors can
also be used to repair a damaged chain on a ride,
if they have the correct width for the drive train.
Belt drive
Your ST2 is equipped with a belt drive (Gates car-
bon belt drive). The automatic tensioning roller
saves you from having to check and retensify the
belt, making it almost maintenance free.
Please refer to the following handling in-
structions to extend the belt’s lifespan. Improper
handling can cause damage to the belt which may
mean it needs replacing!
Do not bend or twist it.
Do not turn it inside out.
Do not bunch or coil it.
Do not use as a belt whip
Do not use tools or sharp instruments when
handling the belt.
Do not push down onto the belt pulley.
Do not oil.
In order to extend its lifespan, we recommend
cleaning the belt with water or a hand brush after
riding through mud or dirt. Residue on the belt
or belt pulleys can result in increased wear and
noise such as squeaking or creaking.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stromer ST3 - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stromer ST3 - 2020 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stromer ST3 - 2020

Stromer ST3 - 2020 User Manual - German - 46 pages

Stromer ST3 - 2020 User Manual - Dutch - 45 pages

Stromer ST3 - 2020 User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info