780319
19
Zoom out
Zoom in
Previous page
1/44
Next page
ANTI-LOCK BRAKING
SYSTEM WITH A PINLIFT ON
THE REAR AXLE
myStromer cannot be held liable for dam-
age caused by unreasonable, unpredictable and/
or inappropriate use of the anti-lock braking sys-
tem (ABS).
Use of the S-Pedelec should always be adjusted
to the overall situation, including traffic pat-
terns and your riding skills.
In addition, the anti-lock braking system (ABS)
actively influences the braking function of your
S-Pedelec. Please bear in mind that, in certain
situations, your braking distance may actually
be extended.
The capacities of your anti-lock braking
system (ABS) have limits!
In extreme riding conditions, such as hard brak-
ing on a slippery surface, setting off on steep as-
cents or when panicking, your might not be able
to steer your S-Pedelec as you expected. When-
ever possible, always try to avoid late and hard
braking because you were relying too much on
your anti-lock braking system (ABS).
As an additional optional safety measure, your
S-Pedelec may also have an anti-lock braking
system (ABS) on the front axle with a pinlift on
the rear axle. This set-up allows for controlled
braking on slippery surfaces and should prevent
you from falling over the bicycle in the event of a
hard brake. The anti-lock braking system is fully
integrated into your S-Pedelec and may only be
differentiated using the ABS control light on your
OMNI display.
Before you first use the anti-lock braking system
(ABS), it is essential that you carefully read the
operating manual from the manufacturer, Blu-
brake, which you can find at www.stromerbike.
com/support and on their own website.
Before the ride:
The anti-lock braking system must be initialized
before each use. You can do this by carefully acti-
vating the front wheel brake at a speed of at least
5km/h after the S-Pedelec has been turned on/
woken up/unlocked. The orange ABS control light
on the OMNI display should no longer light up af-
ter this process. Do not start your ride until you
have successfully initialized the system.
During the ride:
If the ABS control light is displayed during the
ride, this means there is a problem or malfunction
of the system. Restart your S-Pedelec and perform
the initialization again.
If the control light still does not turn off,
consult a specialist Stromer bicycle retailer imme-
diately.
As long as the brakes have no mechanical de-
fects, the S-Pedelec can still brake without the
anti-lock braking system (ABS).
Maintenance and warranty
General work on the braking system must only
ever be performed by a specialist Stromer bicycle
retailer. If the maintenance is not performed in
accordance with the specifications and/or if work
is performed by unauthorized personnel, the war-
ranty and/or guarantee of the whole anti-lock
braking system is immediately voided.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stromer ST3 - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stromer ST3 - 2020 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stromer ST3 - 2020

Stromer ST3 - 2020 User Manual - German - 46 pages

Stromer ST3 - 2020 User Manual - Dutch - 45 pages

Stromer ST3 - 2020 User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info