790823
6
Zoom out
Zoom in
Previous page
1/44
Next page
www.stromltd.com
STROM LIMITED 2021
6
Please ensure that all steps of the installation schedule are carried out in this order, and only this order. Failing
to carry out the installation in this order may result in damage to the boiler and incorrect function of the system.
INSTALLATION SCHEDULE
Electric Boilers
1. HEAT LOSS CALCULATION.
Correctly calculate the correct size unit for the properties heating demand. We regret to inform you that after
installation there is no way to boost the output of the unit so it is important you get the correct unit for the
property. Strom are unable to assist with these calculations.
2. HOT WATER CALCULATION.
For combination units ensure that the boiler has a sufcient heat output to provide the correct temperature &
ow of water required for the application. If you need help calculating this please contact Strom.
3. VOLTAGE & LOAD CALCULATION.
Typically the UK single phase supply is 230V, all our technical data is based on this, however you should do a
measurement and correctly dtermine the correct input voltage, this will determine the size of breaker and cable
size required. All our breaker and cable size recommendations are only that, and should be checked against
your requirements.
4. MAINS WATER PRESSURE.
The maximum rated pressure of the units is 6bar, where water pressure is approaching this limit, or where
dynamic pressure varies and may exceed this a pressure reducing set on the mains supply should be installed.
COMBI BOILER ONLY
COMBI BOILER ONLY
PRIOR TO INSTALLATION
All of these considerations must be made prior to at least installation but preferably before purchase is made.
Regretably once the box to the boiler has been opened we are unable to accept returns of the product unless the
product is faulty or does not operate as advertised by Strom.
IMPORTANT
It is important that once you start installing the boiler you do not leave it unattended with power connected or
water in the circuits unless the whole installation and all steps have been completed. If you intend to leave the
boiler unattended without completing the installation you should ensure that no leaks are present or possible,
and that the electric have been isolated.
6


Need help? Post your question in this forum.

Forumrules
1

Forum

strom-e-boiler

Reset search

  • After turning off heater, I cannot turn it back on. The Menu button does not work. Submitted on 5-4-2023 at 16:40

    Reply Report abuse
  • the front panel is flashing E5 and I can not change anything Submitted on 13-12-2022 at 13:27

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strom E-Boiler at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strom E-Boiler in the language / languages: English as an attachment in your email.

The manual is 3.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info