518658
10
Zoom out
Zoom in
Previous page
1/15
Next page
TREADMILL OPERATIONS
TREADMILL OPERATIONS
Programs Setup and Selection - (MA600 P1 - P12 , MA400 P1 - P9)
1.Select Program: To Start a program simply select the desired program by pressing on either the "UP"
and "DOWN" or "FAST" and "SLOW" buttons and then pressing the "MODE" button.
2.Select Level:Select the desired level (L1~L3) by pressing on either the "UP" and "DOWN" or "FAST"
and "SLOW" buttons and then pressing the "MODE" button.
3.Set Time: Now chose how long you would like to workout by pressing either set of "UP" and "DOWN"
or Fast/Slow arrows. Each time you push the up down or Fast/Slow button the workout time will
change by one minute. You can also hold these buttons down to quickly scroll through the time.
The shortest preset program time is 10 minutes and the longest is 99 minutes.
4.Press Start: Once the desired time is selected, push the "Qucik Start" button to begin your workout.
User Setup Programs (MA600:2 users, MA400:1 user)
1.Select Program: Use either set of "up" and "down" arrows to scroll through the programs until you
reach U1 or U2 and press the "Mode" button.
2.Set Time: Chose how long you would like to workout by pressing either set of "up" and "down" and
press the "Mode" button.
3.Enter Segment Speed and Incline: each program is divided into 10 equal segments. Select the
desired speed for each segment by pressing on the "Fast" and "Slow" buttons. Then select the desired
incline for each segment by pressing on the "Up" and "Down" arrows. After selecting the incline and
speed for the segment press the "Mode" button and make the selection for the next segment until all
10 segments are completed. Press the "Start" button to begin the workout.
4.Editing a User Setup Program: To edit the program, scroll to either "U1" or "U2" programs and press
the "Mode" button. Make the desired changes to the program and press "Mode" at the end of each
segment. Press the "Start" button once completed.
Note: After a user program has been set, to select that program for subsequent workouts, use th up
and down arrows to scroll to "U1" or "U2" and press the "START" button.
Target Heart Rate Program Setup
1.Select Program: Use either "up" or "down" arrows to scroll through the programs until "H1" is shown
on the center display. Then press the "Mode" button.
2.Select Age: Use either "up" or "down" arrows to enter the user age. Then press the "Mode"
button.
3.Set Target Heart Rate: Use either "up" or "down" arrows to set the target heart rate. Then
press "Mode". After a warm-up period, the program will automatically adjust the speed to maintain the
Target Heart Rate (Range From 60~180 bpm).
4.Enter program Time: Use either "up" or "down" arrows to enter the program workout time.
Then press the "Start" button.
5.Set Target Max Speed:Use either "up" or "down" arrows to set the target max. speed. The speed will
not increase over than max. speed even though pulse is not reach target heart rate yet.
9
MA600/MA400
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for StrengthMaster MA-600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of StrengthMaster MA-600 in the language / languages: English as an attachment in your email.

The manual is 13,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of StrengthMaster MA-600

StrengthMaster MA-600 User Manual - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info