659741

Stoves STRICH600GH Richmond Manual

15
Zoom out
Zoom in
Previous page
1/24
Next page
INSTALLATION
13.300
Fit the hob into the cutout &
secure to worktop
Place the hob into the cutout and
secure in place using the four brackets
and screws provided.
The brackets should be orientated to
suit the worktop thickness as shown,
then inserted into the four slots (two on
the front edge and two on the rear)
and screwed into the underside of the
worktop using the woodscrews provided.
The screws
should be
tightened just
sufcientlyto
secure the hob
and pull
the top press-
ingushwith
the worktop.
Installation advice - cabinetry
Dealing with sides, cross-rails
and back-panels in cabinetry
Depending on the cabinets, the worktop
thickness and the hob positioning,
it is possible for the hob base, the
clamp brackets and/or the gas connection
to interfere with parts of the
cabinet. These can be dealt with as
follows:
Cabinet sides
If the hob is to be installed across the
top of two cabinet housing units, then
the base of the hob may interfere with
the sides of these units. It will be neces-
sary
to cut away the top of the unit
sides locally to clear the hob, clamp
brackets and/or gas connection.
Cross-Rails
1. Interference with hob base
If there are any cross-rails which
obstruct the hob base by running
across the worktop cutout, they can
simply be removed or locally cutaway
to allow the hob to be installed, depend-
ing on the particular installation. Any mod-
icationsmustensurethatthestrengthof
the cabinet is maintained.
2. Interference with clamp brackets
If there are any cross-rails which prevent
the clamps from being positioned on
the front or rear edges of the hob, then
they can be removed or locally cut-away
around the brackets to allow the brackets
tobeinstalled.Anymodicationsmust
ensure that the strength of the cabinet is
maintained.
Back-panel
1. Interference with clamp brackets
If the cabinet has a back-panel
which prevents the clamps from
being positioned on the rear edge
of the hob, then this panel can be
completely removed or locally cutaway
to allow the brackets to be
installed.
2. Interference or restriction of gas
connection. If the cabinet has a back-pan-
el which interferes with the position
of the gas supply to the hob, then
the panel can be completely
removed or locally cut-away to
allow connection to the gas supply.
seal
hob
40mm
worktop
seal
hob
30mm
worktop
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stoves STRICH600GH Richmond at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stoves STRICH600GH Richmond in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info