Manual Stoves Sterling 900MF (page 4 of 52) (English)

659727

Zoom out

Zoom in

1/52

Users Guide & Installation

Handbook

Stoves

Built-in Electric 60 LC

Part No 083332002 Date 02/12/2014

3.010

CONTENTS & INTRODUCTION

CONTENTS

• SAFETY

• USING THE PRODUCT

• CLEANING

• INSTALLATION INSTRUCTIONS

• TECHNICAL DATA

• CUSTOMER CARE

INTRODUCTION

Thank you for buying this British-

built appliance from us.

This guide book is designed to help you

through each step of owning your new

cooker, from installation to use. Please

read it carefully before you start using

your product, as we have endeavored to

answer as many questions as possible,

and provide you with as much support as

we can.

If,however,youshouldndsomething

missing, or not covered, please contact

our Customer Care team. Their number is

located on the back page of this book.

For customers outside the UK and North-

ern Ireland, please contact your local

supplier.

When you dial this number you will hear a

recorded message and be given a number

of options. This indicates that your call

has been accepted and is being held in a

queue. Calls are answered in strict rota-

tion as our Customer care representatives

become available.

Alternatively, general information, spares

and service information is available from

our website. The address is located on the

back page of this book.

WARRANTY

Your new appliance comes with our 12

month guarantee, protecting you against

electrical and mechanical breakdown. To

481 0182, complete the registration form

included or register online at the web

address located on the back page of this

book.

For full terms & conditions of the manu-

facturer’s guarantee, refer to the website

on the back of this book.

In addition, you may wish to purchase

anextendedwarranty.Aleaetexplain-

ing how to do this is included with your

appliance.

European Directives

As a producer and a supplier of cooking

appliances we are committed to the pro-

tection of the environment and are in the

compliance with the WEEE directive. All

our electric products are labelled accord-

ingly with the crossed out wheeled bin

symbol. This indicates, for disposal pur-

poses at end of life, that these products

must be taken to a recognised collection

points, such as local authority sites/local

recycling centres

This appliance Complies with European

Community Directives (CE) for household

and similar electrical appliances and Gas

appliances where applicable.

This appliance conforms to European Di-

rective 2009/125/EC regarding Eco design

requirements for energy-related products

Our policy is one of constant development

and improvement, therefore we cannot

guarantee the strict accuracy of all of our

illustrationsandspecications-changes

may have been made subsequent to

publishing.

SAFETY

5.1

BEFORE USING THE PRODUCT

Make sure that you have removed all

packaging and wrapping. Some of the

items inside this appliance may have

additional wrapping.

Please note:- these safety warnings

cover both gas and electric products.

GENERAL

WARNING! - The appliance and

its accessible parts become hot

during use. Care should be taken to

avoid touching heating elements.

Children less than 8 years of

age shall be kept away unless

continuously supervised. This

appliance can be used by children

aged from 8 years and above and

persons with reduced physical

sensory or mental capabilities or

lack of experience and knowledge

if they have been given supervision

or instruction concerning the use

of the appliance in a safe way and

understand the hazards involved.

Children shall not play with the

appliance. Cleaning and user

maintenance shall not be made by

children without supervision.

WARNING! - Unattended

cooking on a hob with fat or oil

can be dangerous and may result

inre.

NEVERtrytoextinguisharewith

water, but switch off the appliance

and then cover the ame with a

lid or damp cloth.

WARNING! - Dangerofre:Do

not store items on the cooking

surfaces.

WARNING! - Servicing should

be carried out only by authorised

personnel.

• The appliance must never be

disconnected from the mains

supply during use, as this will

seriously affect the safety and

performance, particularly in

relation to surface tempera-

tures becoming hot and gas

operated parts not working

efciently.Thecoolingfan

(iftted)isdesignedtorun

on after the control knob has

been switched off.

• Do not spray aerosols in the

vicinity of this appliance while

it is in operation.

• Donotstoreoruseam-

mable liquids or items in the

vicinity of this appliance.

• Do not modify this appliance.

CAUTION: The use of a gas

cooking appliance results in the

production of heat, moisture

and products of combustion in

the room in which it is installed.

Ensure that the kitchen is well

ventilated especially when the

appliance is in use: keep natural

ventilation holes open or install

a mechanical ventilation device

(mechanical extractor hood).

SAFETY

5.1

Prolonged intensive use of the

appliance may call for additional

ventilation, for example opening

of a window, or more effective

ventilation, for example increasing

the level of mechanical ventilation

where present.

WARNING! - Do not operate the

appliance without the glass panel

correctlytted.

WARNING! - Never put items

directly on the base of the oven or

cover the oven base with foil, as

this can cause the base element

to overheat.

WARNING! - The top element

gets extremely hot when in use, so

take extra care to avoid touching

it.

WARNING! - Do not modify the

outer panels of this appliance in

any way.

WARNING! - This appliance

must be earthed.

WARNING! - There is a risk of

electric shock, so always make

sure you have turned off and

unplugged your appliance before

starting. Always allow the product

to cool down before you change

a bulb.

WARNING! - Do not use harsh

abrasive cleaners or sharp metal

scrapers to clean the oven door

glass since they can scratch

the surface, which may well

result in shattering of the glass.

WARNING! - Do not operate the

appliance without the glass panel

correctlytted.

CAUTION: This appliance is for

cooking purposes only. It must

not be used for other purposes,

for example room heating.

OVEN / GRILL

• Always take care when removing food

from the oven as the area around the

cavity may be hot.

• Always use oven gloves when

handling any utensils that have been

in the oven as they will be hot.

• Always make sure that the oven

shelves are resting in the correct

position between two runners. Do

not place the oven shelves on top

of the highest runner, as this is not

stable and can lead to spillage or

injury.

• Always use the Minute Minder (if

tted)ifyouareleavingtheoven

unattended - this reduces the risk of

food burning.

Do Not

• Never place items on the door while

it is open.

• Never wrap foil around the oven

shelvesorallowfoiltoblocktheue.

• Never drape tea towels near the oven

whileitison;thiswillcauseare

hazard.

• Never pull heavy items, such as

turkeys or large joints of meat, out

from the oven on the shelf, as they

may overbalance and fall.

Never use this appliance to heat anything

other than food items and do not use it

for heating the room.

USING THE GRILL - ELECTRIC

Caution: Accessible parts may be

hot when the grill is used - young

children should be kept away.

A grill pan handle can be purchased as an

optional extra from our spares department

quotingthepartnumbersbelow:

Handle - 082283705

Handle grip - 082469100

Complete grill pan pack - 012635666

Contact details can be found on the

customer care page.

If cleaning the grill pan when it is hot, use

oven gloves to move it.

Food for grilling should be positioned

centrally on the trivet.

Using the grill

Important: The grill door must be fully

open when the grill is used.

Open the grill door. Turn the control knob

to the required setting. For best cooking

results, we recommend that you preheat

the dual grill for 3 minutes and the single

grill for 5 minutes.

For grilling small quantities of food, the

centre (economy) grill can be used with

the grill trivet inverted. For large quanti-

ties of food, the full grill can be used.

Push the grill pan towards the back of the

shelf, to position it under the grill.

The speed of grilling can be controlled by

adjusting the grill setting or by selecting a

higher or lower shelf position. For toast-

ing, and for grilling foods such as bacon,

sausages or steaks, use a higher shelf

position. For thicker foods such as chops

or chicken joint pieces, use a middle to

low shelf position.

The grill trivet, inside the grill pan, can be

inverted to give a high or low position, or

it may be removed.

To switch off, turn the control knob to the

off position.

Using aluminium foil

Using aluminium foil to cover the grill pan,

or putting items wrapped in foil under the

grillcreatesarehazard.

The cooling fan

When the grill is switched on, the cool-

ing fan comes on to keep the fascia and

control knobs cool during grilling. The fan

may continue to operate for a period after

the grill has been switched off.

During use the fan may cycle on and off,

this is normal.

Alternatively, you may have grill symbols

similar to these below.

Full grill at 1/4

power

Centre grill at full

power

Full grill area at

full power

Types of grill

Variable rategrill:

has adjustable heat settings

1 (low) to 8 (high) or 5 (high) - de-

pending on the model.

Single grill:hasonegrillelement.The

grill pan trivet MUST be inverted when

using the single grill function.

Dualgrill: has two grill elements which

can be used together, or as a single

grill.

7.101

8.100

USING THE TOP OVEN - ELECTRIC (if tted)

When you are cooking keep children

away from the vicinity of the oven.

Caution: The top element gets

extremely hot when in use, so

take extra care to avoid touch-

ing it.

The top oven is a conventional oven.

Note:Thetopovenisnotcontrolledby

theprogrammer(iftted).

To turn on the top oven

Turn the temperature control knob until

the required temperature is selected.

The red thermostat indicator will come on

until the selected temperature is reached,

and then go off; it will turn on and off

periodically as the thermostat operates to

maintain the selected temperature.

To switch off, return the top oven control

knob to the off position.

Important: Never put items directly on

the base of the oven, or cover the oven

base with foil, as this may cause the ele-

ment to overheat. Always position items

on the shelf.

The cooling fan

When the top oven is switched on, you

will hear the cooling fan come on - this

keeps the fascia and control knobs of the

appliance cool during cooking. The fan

may continue to operate for a period after

the oven control has been switched off.

Preheating

The oven must be preheated when cook-

ing frozen or chilled foods, and we rec-

ommend preheating for yeast mixtures,

batters,soufés,andwhiskedsponges.

Preheat the oven until the indicator light

switchesoffforthersttime,thiswill

take up to 15 minutes depending on the

temperature selected.

If you are not preheating the oven, the

cooking times in the following guide may

need to be extended, as they are based

on a preheated oven.

Shelf positions

There are either 3 or 4 shelf positions,

depending on which model you have

purchased. These are counted from the

bottom of the oven upwards, so shelf

position 1 is the lowest.

When cooking frozen or chilled food, use

the highest possible shelf position, while

allowing some clearance between the

food and the top element.

The oven shelf must be positioned with

the up-stand at the rear of the oven and

facing up. Position baking trays and roast-

ing tins on the middle of the shelves, and

leave one clear shelf position between

shelves, to allow for circulation of heat.

When using the top oven

As part of the cooking process, hot air is

expelled through a vent at the top of the

oven(s). When opening the oven door,

care should be taken to avoid any possible

contact with potentially hot air, since this

may cause discomfort to people with sen-

sitive skin. We recommend that you hold

the underneath of the oven door handle.

8.100

USING THE TOP OVEN - ELECTRIC (if tted)

TOP OVEN BAKING GUIDE

Cooking times

These times are based on cooking in a

preheated oven.

These cooking times are approximate,

because the size and type of cooking dish

willinuencetimeaspersonalprefer-

ences.

Shelf positions

As a general guide, when cooking frozen

or chilled food, use the highest pos-

sible shelf position, while allowing some

clearance between the food and the top

element. Follow the instructions given on

packaging.

Item Temperature

(°C)

Shelf

Position

Approximate cooking time

Small cakes

Victoria sandwich

(2 x 180mm / 7”)

Swiss roll

Semi rich fruit cake

(180mm x 7”)

Scones

Meringues

180

160

200

140

215

90 - 100

15 - 20 mins

20 - 25 mins

8 - 12 mins

2¼ - 2¾ hours

10 - 15 mins

2 - 3 hours

Shortcrust pastry

Puff/akypastry

Choux pasrty

200 - 210

Depends on size & type of cook-

ingdish&alsothelling

Biscuits

Sponge pudding

Milk pudding

160 - 200

150

140

10 - 20 mins

30 - 45 mins

2 - 2½ hours

Cooking temperatures

The temperature settings and time given

in the Baking Guides are based on dishes

made with block margarine. If soft tub

margarine is used, it may be necessary

to reduce the temperature setting. If a

recipe gives a different temperature set-

ting to that shown in the guide, the recipe

instruction should be followed.

Because the top oven is more compact,

it may be necessary to reduce cooking

temperaturesspeciedinrecipesbyupto

20°C.

Use the baking guide as a reference for

determining which temperatures to use.

9.100

USING THE MAIN OVEN - ELECTRIC

Accessible parts may be

hot when the oven is used.

Young children should be

kept away.

To switch on the oven

Turn the oven control knob(s) to the

required setting.

Theredthermostatindicator(iftted)will

come on until the selected temperature

is reached and then go off; it will turn

on and off periodically as the thermostat

operates to maintain the selected tem-

perature.

To switch off, return the control knob to

the off position.

When using the oven

As part of the cooking process, hot air

is expelled through a vent in the oven.

When opening the oven door, care should

be taken to avoid any possible contact

with potentially hot air, since this may

cause discomfort to people with sensitive

skin. We recommend that you hold the

underneath of the oven door handle.

PREHEATING

Fanned oven

When cooking sensitive items such as

soufeandYorkshirepuddingsor,when

cooking bread, we recommend that the

oven is preheated until the neon switches

offforthersttime.Foranyothertypes

of cooking, a preheat may not be re-

quired.

Conventional oven

Preheating is always required

Manual Operation (fanned only)

The programmer must be set to manual

operation before the main oven can be

used. If A (Auto) is on the programmer

display, return the oven to manual by

pressing the up and down buttons simul-

taneously Any programme which has been

set is cancelled.

The cooling fan

The cooling fan may operate when the

main oven is on and may continue to op-

erate for a period after the oven has been

switched off.

OVEN FURNITURE

Oven shelves

The oven shelf must be positioned with

the upstand at the rear of the oven and

facing upwards.

Position baking trays and roasting tins on

the middle of the shelves.

Baking tray and roasting tins

For best cooked results and even brown-

ing, the recommended size baking trays

and roasting tins that should be used are

as follows;

Baking tray 350mm x 250mm

This size of baking tray will hold up to 12

small cakes.

Roasting tin 370mm x 320mm

We recommend that you use good quality

cookware. Poor quality trays and tins may

warp when heated, leading to uneven

baking results.

9.100

USING THE MAIN OVEN - ELECTRIC

Slow cooking ( Setting or 100°C)

• Make sure that frozen foods are thor-

oughly thawed before cooking.

• Do not slow cook joints of meat

or poultry weighing more than

2¼kg/4½lb.

• Preheat the oven to 170°C and cook

for 30 minutes, then adjust the oven

control to or 100°C (slow cook

setting) for the remainder of the

cooking time.

• Slow cooking times will be about 3

times as long as conventional cooking

times.

• Do not open the oven door unneces-

sarily during slow cooking, as this will

result in heat loss at low tempera-

tures.

• Alwaysusedisheswithtightlytting

lids.Torectifybadlyttinglids,place

foil over the dish underneath the lid.

Aluminium foil

Use foil only to cover food or cooking

dishes, using foil to cover the shelves or

ovenbasecreatesarehazard.

Cooking with a fanned oven

As this is a high efciency oven,

you may notice the emission of

steam from the oven when the door

is opened. Please take care when

opening the door.

If you are used to cooking with a conven-

tionalovenyouwillndanumberofdif-

ferences to cooking with a fan oven which

willrequireadifferentapproach:

There are no zones of heat in a fan oven

as the convection fan at the back of

the oven ensures an even temperature

throughout the oven.

This makes it ideal for batch baking - eg;

when planning a party as all the items will

be cooked within the same length of time.

Foods are cooked at a lower temperature

than a conventional oven, so conven-

tional recipe temperature may have to be

reduced. Please refer to the conversion

chart.

Preheating is generally not necessary as a

fan oven warms up quickly.

Thereisnoavourtransferenceinafan

oven, which means you can cook strong

smellingfoodssuchasshatthesame

time as mild foods - eg; milk puddings.

When batch baking foods that will rise

during cooking - eg; bread - always

ensure that enough space has been left

between the shelves to allow for the rise.

Notes:

When 2 or more shelves are being used, it

may be necessary to increase the cooking

time slightly.

Because the 2 oven shelves are wider

than in many ovens, it is possible to cook

2 items per shelf - eg; 2 victoria sand-

wiches or 2 casseroles.

Although you need to keep in mind the

points ‘To help the air circulate freely’

with careful choice of dishes and tins, it

is possible to cook a complete meal, and

perhaps something else for the freezer, in

the oven at the same time.

When roasting meats, you will notice that

fat splashing is reduced, which is due in

part to the lower oven temperatures, and

will help keep cleaning of the oven to a

minimum.

Because a fan oven has an even tem-

perature throughout the oven, there is no

need to follow the shelf positions given in

the baking guide.

9.100

USING THE MAIN OVEN - ELECTRIC

There is no need to interchange dishes

onto different shelves part way through

cooking, as with a conventional oven.

To help the air circulate freely

Position the shelves evenly within the

oven and maintain a clearance from the

oven roof and base.

If more than one cooking dish or bak-

ing tray is to be used on a shelf, leave a

gap of at least 25mm between the items

themselves and the oven interior.

Defrosting and cooling in the

main oven

To defrost frozen foods, turn the main

oven control to the defrost position, place

the food in the centre of the oven and

close the door.

To cool foods after cooking prior to refrig-

erating or freezing, turn the main oven

control to the defrost position and open

the door.

Defrosting times

Smallorthinpiecesoffrozenshormeat

-eg;shlets,prawns&mincewilltake

approximately 1 - 2 hours.

Placing the food in a single layer will

reduce the thawing time.

A medium sized casserole or stew will

take approximately 3 - 4 hours.

A 1½kg/3lb oven ready chicken will take

approximately 5 hours, remove the giblets

as soon as possible.

Be safe

Do not defrost stuffed poultry using this

method.

Do not defrost larger joints of meat and

poultry over 2kg/4lb using this method.

Never place uncooked food for defrosting

next to cooked food which is to be cooled,

as this can lead to cross contamination.

Defrostingmeat,poultry,andshcanbe

accelerated using this method but make

sure they are completely thawed before

cooking thoroughly. Place meat and poul-

try on a trivet in a meat tin.

MAIN OVEN BAKING GUIDE

Cooking times & temperatures

The temperature settings and times given

in the baking guide are based on dishes

made with block margarine. If soft tub

margarine is used it may be necessary to

reduce the temperature setting.

Allow enough space between shelves for

food that will rise during cooking.

Do not place items on the oven base as

this will prevent air circulating freely.

9.100

USING THE MAIN OVEN - ELECTRIC

Note:Thisisafannedoven,therefore

some adjustment will have to be

made to conventional cooking tempera-

tures. The table below shows conven-

tional cooking temperatures, fanned oven

temperatures and gas marks. For opti-

mum results,

conventional temperatures need to be

converted to fanned oven temperatures.

For example, an item which would nor-

mally cook at a conventional temperature

of 180 °C, will now cook at the fanned

oven temperature of 160°C.

Conventional temperature

(°C)

Fanned Oven

(°C)

Gas Mark

100

110

130

140

150

160

180-190

200

220

230

250

100

110

120

130

140

150

160

170

180

190

200

1/4

1/2

4-5

Food Type Temperature

settings (°C)

Time

Approx.

Shelf

Position

Cakes

Small cakes

Victoria sandwich

Semi rich fruit cake

Christmas cake

Conv

190

180

150

Fanned

160

125

15 - 25

20 - 30

2.5HRS - 3HRS

2 - 4

Puddings

Bread and butter pud-

ding

Fruit crumble

170

200

150

175

45 - 1hr

40 - 1hr

Miscellaneous

Yorkshirepudding:

large

small

Shortcrust pastry

220

200

180

40 - 48

15 - 20

Depends on

lling

4 - 5

9.100

USING THE MAIN OVEN - ELECTRIC

Traditional fruit cakes

It should be remembered that ovens can

vary over time, therefore cooking times

canvary,makingitdifculttobeprecise

when baking fruit cakes.

It is necessary therefore, to test the cake

beforeremovalfromtheoven.Useane

warmed skewer inserted into the centre of

the cake. If the skewer comes out clean,

then the cake is cooked.

• Follow the temperatures suggested

in the recipe and then adjust accord-

ingly to the conversion table.

• Do not attempt to make Christmas

cakes larger than the oven can cope

with, you should allow at least 25mm

(1”) space between the oven walls

and the tin.

• Always follow the temperatures rec-

ommended in the recipe.

• To protect a very rich fruit cake dur-

ing cooking, tie 2 layers of brown

paper around the tin.

• We recommend that the cake tin is

not stood on layers of brown paper,

as this can hinder effective circulation

of air.

• Do not use soft tub margarine for

richfruitcakes,unlessspeciedin

the recipe.

• Always use the correct size and

shape of tin for the recipe quantities.

Roast turkey

Roasting turkey involves cooking two

different types of meat - the delicate light

breast meat, which must not be allowed

to dry out, and the darker leg meat,

which takes longer to cook.

The turkey must be roasted long enough

for the legs to cook, so frequent bast-

ing is necessary. The breast meat can be

covered once browned.

• Always make sure that the turkey is

completely thawed and that the gib-

lets are removed before cooking.

• Turkey should be roasted at 160°C

- 180°C (fanned) or 180°C - 200°C

(conventional) for 20 minutes per

450g (1 lb), plus 20 minutes, unless

packaging advises otherwise.

• The turkey can be open roasted,

breast side down, for half of the cook

time, and then turned over for the

remainder of the cooking time.

• If the turkey is stuffed, add 5 minutes

per 450g (1 lb) to the cooking time.

• If roasting turkey covered with foil,

add 5 minutes per 450g (1 lb) to the

cooking time.

To test if the turkey is cooked, push a

neskewerintothethickestpartofthe

thigh. If the juices run clear, the turkey

is cooked. If the juices are still pink, the

turkey will need longer cooking.

9.100

USING THE MAIN OVEN - ELECTRIC

Roasting guide

The times given in the roasting guide

are only approximate, because the size

andageofthebirdwillinuencecooking

times as will the shape of a joint and the

proportion of the bone.

Frozen meat should be thoroughly thawed

before cooking. For large joints it is advis-

able to thaw over night.

Frozen poultry should be thoroughly

thawed before cooking. The time required

depends on the size of the bird - eg; a

large turkey may take up to 48 hours to

thaw.

Use of a trivet with a roasting tin will

reduce fat splashing and will help to keep

the oven interior clean. Alternatively, to

help reduce fat splashing, potatoes or

other vegetables can be roasted around

the meat/poultry.

Notes:

• When cooking stuffed meat or poultry

calculate the cooking time from the

total weight of the meat plus the

stufng.

• For joints cooked in foil or covered

roasters, and for lidded casseroles,

add 5 minutes per 450g (1lb) to the

calculated cooking time.

• Smaller joints weighing less than

1.25kg (2½lb) may require 5 minutes

per 450g (1lb) extra cooking time.

• Position the oven shelf so that the

meat or poultry is in the centre of the

oven.

• It is recommended that the appliance

is cleaned after open roasting.

Cook in main oven at:

160°C - 180°C (fanned)

180°C - 200°C (conventional)

Approximate Cooking Time

(preheated oven)

Beef

Rare

Medium

Well done

20 minutes per 450g (1lb), plus 20 minutes

25 minutes per 450g (1lb), plus 25 minutes

30 minutes per 450g (1lb), plus 30 minutes

Lamb

Medium

Well Done

25 minutes per 450g (1lb), plus 25 minutes

30 minutes per 450g (1lb), plus 30 minutes

Pork

35 minutes per 450g (1lb), plus 35 minutes

Poultry

20 minutes per 450g (1lb), plus 20 minutes

USING THE OVEN/GRILL - MULTI-FUNCTION

9.120

Oven & Grill Functions

The chart below details all of the functions which are available. Your oven may not

have all of the functions shown here.

Symbol Function /

Feature

Recommended Uses

Conventional Grill

This function cooks food from the top and is ideal for a

range of food from toast to steaks. As the whole grill is

working you can cook large quantities of food.

Economy Grill

For smaller quantities of food, but is still ideal for any-

thing from toast to steaks.

Fanned Grill

The fan allows heat to circulate around the food. Ideal

forthinnerfoodssuchasbacon,shandgammon

steaks. Foods do not require turning. Use with the oven

door closed

Conventional Oven

This function is ideal for traditional roasting. The meat is

placed in the middle of the oven, roast potatoes towards

the top.

Top Heat Only

The heat is ideal for browning the tops of food as it is

notaserceasthegrillfollowingconventionalorfanned

cooking. Provides additional browning for dishes like

LasagnaorCauliowercheese.

Base Heat Only

The base heat can be used to provide additional brown-

ing for pizzas, pies and quiche. Use this function towards

the end of cooking.

Fanned Oven

The even temperature in the oven makes this function

suitable for batch baking, or batch cooking foods.

Fan and Base Heat

Only

Used to cook open pies (such as mince pies) the base

element ensures that the base is cooked while the fan

allowstheairtocirculatearoundthelling-without

being to intensive.

Intensive Bake

Suitable for food with a high moisture content, such as

quiche, bread and cheese cake. It also eliminates the

need for baking pastry blind.

Defrosting and Cool-

ing

To defrost foods, such as cream cakes/gateaux, use with

the oven door closed. For cooling dishes prior to refrig-

eration, leave the door open.

Oven Temperature

Control

Use to select the oven temperature.

Oven Selector

Control

Use to select the oven function.

Lights Only

Use when the oven is switched off and cold to aid

cleaning the oven.

9.120

GRILLING IN THE MAIN OVEN

The main oven grill & fanned grill are

xedsettingsusingtheinnerelement

only. Make sure that the programmer is

set to manual before grilling. When using

either grill function, invert the grill pan

trivet and preheat for 5minutes.

Conventional grill

The door must be open when the grill

is used for conventional grilling - either

fully open or using the door stop

position - open the door about 75mm

and it will hold open.

If the grill door is closed while the grill

is in use, the grill will cycle on and off

at a high temperature, causing the

door to become hot.

(i) Turn the selector control knob to

the conventional grill setting.

(ii) Turn the oven temperature control

knob to the full on setting.

Fanned grill

The door must be closed when the

fanned grill is used.

When opening the door, take care to

avoid skin contact with any steam

which may escape from the cooking.

(i) Turn the selector control knob to

the fan grill setting.

(ii) Turn the oven temperature control

knob to the desired temperature setting.

When the fanned grill is selected, only

the inner element will come on.

Caution: Accessible parts may

be hot when the ovens are

used, young children should be

kept away.

The main oven is a multi-function oven,

and may be used as a conventional

oven or a fanned oven. It may also be

used as a grill, or with one of the other

oven functions.

Manual operation

The programmer must be set to manual

operation before the main oven or grill

functions can be used. If A (Auto) is

on the programmer display, return the

oven to manual operation by pressing

the two end buttons.

To turn on the main oven

Step 1 - Select the function

Turn the selector control knob in either

direction, until the function you require

appears in the window.

Step 2 - Set the main oven control

If you have selected an oven cooking

function, then simply turn the main oven

temperature control knob to the required

temperature - this brings on the neon

indicator light, which will stay on until the

oven reaches the required temperature.

To switch off the main oven, return the

control knob to the off

position.

Automatic operation

See ‘Programmer / Clock’ section.

Using the main oven

Caution:

Accessible parts may

be hot when the appliance is in

use - keep children away from

the vicinity of the oven.

Never put items directly on the base of

the oven or cover the oven base with

foil, as this can cause the base element

to overheat.

USING THE OVEN/GRILL - MULTI-FUNCTION

9.120

Manual operation

Set the programmer to manual operation.

See ‘Programmer / Clock’ section. Turn

the selector control knob to the symbol

for the desired oven function. Turn the

main oven temperature control knob to

the desired temperature. The red thermo-

stat indicator neon will come on and off

until the selected temperature is reached

and then go off; it will turn on and off

periodically as the thermostat operates to

maintain the selected temperature.

To switch off the main oven, return the

main oven control knob to the off

position.

Automatic operation

See ‘Programmer / Clock section.

Preheating

Always use the fan oven setting for

preheating to save time and electricity.

After the oven has been preheated on the

fan oven setting, turn the selector control

knob to the oven setting you require. The

oven must be preheated when cooking

frozen or chilled food, and we recommend

preheating for yeast mixtures, batters,

soufésandwhiskedsponges,otherwise

preheating is not necessary as a fan oven

warms up quickly. Preheat the oven until

the indicator neon switches off for the

rsttime;thiswilltakebetween5-15

minutes, depending on the temperature

selected.

To help the air circulate freely

• Position the shelves evenly within the

oven and maintain a clearance from

the oven roof and base.

• If more than one cooking dish or

baking tray is to be used on a shelf,

leave a gap of at least 25mm be-

tween the items themselves and the

oven interior.

• Allow enough space between shelves

for food that will rise during cooking.

• Do not place items on the oven base

as this will prevent air from circulat-

ing freely.

MAIN OVEN FUNCTIONS

Conventional oven

(i) Turn the selector control knob to the

conventional oven symbol.

(ii) Turn the main oven control knob to

the required temperature.

The temperature you select corresponds

to the temperature in the middle of the

oven. The top heat comes from the outer

element of the grill, and the base heat is

under the oven base.

Top heat only

(i) Turn the selector control knob to the

top heat symbol.

(ii) Turn the main oven control to the

required temperature.

Base heat only

(i) Turn the selector control knob to the

base heat symbol.

(ii) Turn the main oven control knob to

the required temperature.

USING THE OVEN/GRILL - MULTI-FUNCTION

9.120

Fan oven

(i) Turn the selector control knob to the

fan oven symbol.

(ii) Turn the main oven control knob to

the required temperature.

The fan oven comes on when the oven is

switched on and circulates the air around

the oven to give a fairly even temperature

throughout the oven.

Fan and base heat only

(i) Turn the selector control to the fan and

base heat symbol.

(ii) Turn the main control to the

required temperature.

Intensive bake

(i) Turn the selector control to the

intensive bake symbol.

(ii) Turn the main oven control to the

required temperature.

Defrosting and cooling

(i) Turn the selector control knob to

defrost

(ii) Turn the oven control to the light

symbol.

To defrost frozen foods, place food in the

centre of the oven and close

the door.

To cool foods after cooking prior to

refrigeration or freezing, place food in the

centre of the oven with the door open.

Be safe

• Do not defrost stuffed poultry using

this method.

• Do not defrost larger joints of meat

or poultry over 2kg / 4lb using this

method.

• Never place uncooked food which is

to be defrosted next to cooked food

which is to be cooled, as this can lead

to cross contamination.

Please refer to the Cooking Guide for

more information on using the Defrost

function.

SLOW COOKING

Turn the selector control to either

conventional oven or fanned oven.

Do not try to slow cook using any of the

other oven functions.

For roasting joints of meat or poultry

and for pot roasts, preheat the oven to

190°C - 200°C and cook for 30 minutes,

then adjust the oven temperature control

to 110 - 120°C for the remainder of the

cooking time.

• Always use the top half of the oven

when slow cooking with the conven-

tional oven function.

• Slow cooking times will be about

three times as long as conventional

cooking times.

• Make sure that frozen foods are

• thoroughly thawed before cooking.

• Do not slow cook joints of meat or

poultryweighingmorethan21⁄4kg/

• 41⁄2lb.Alwaysusethetophalfof

the oven for slow cooking.

USING THE OVEN/GRILL - MULTI-FUNCTION

11.100

THE ALTERNATIVE PROGRAMMERS

There are two types of programmer cov-

ered in this section - push button & touch

control. Both programmers have the same

symbol variants & functions but may vary

in their method of operation.

The push button programmer

Sym-

bol

Sym-

bol

What is it?

Down/minus

Used to decrease cook

/ end time, remove

minutes from the

minute minder and

adjust the time of day.

Also for listening to

and setting the alarm

tone.

Up/plus

Used to increase

cook / end time, add

minutes to the minute

minder and adjust the

time of day.

FUNC-

TION

MODE

Function button

Used to select the

functions available on

this timer.

Pressoncefor:Minute

Minder.

Presstwicefor:Cook

time

Pressthreetimesfor:

End time.

How to use these

functions is explained

later on in this sec-

tion.

The ‘function’ button in the centre is used

for setting the minute minder and setting

up the automatic cooking. See below for

details.

Symbols on the LED display.

This ‘A’ symbol appears when either

a semi, or fully automatic program is

selected.Thissymbolwillashwhilea

program is being set.

Once a program is set the symbol will

light up, and remain lit until the alarm

sounds, or the program is cancelled.

This bell symbol appears when the Minute

Minder function has been selected.

While the Minute Minder is being set, the

Bellsymbolashes.Oncethelengthof

time is set, the Bell symbol remains lit

until the time runs down, or the function

is cancelled.

This message and ‘A’ symbol appear when

you are asked to set the length of time

you require the oven to cook automati-

cally for.Using the Up and Down buttons

adjusts this accordingly.

USING THE CLOCK/PROGRAMMER-ELEC(if fitted)

11.100

This message and ‘A’ symbol appear when

you are asked to enter in an end time, or

when you would like the oven to switch

itself off.

To set the time of day

• Press the Up and Down buttons

together for a few seconds, and

release.

• The‘•’inbetweenthenumberson

theLEDDisplaywillbegintoash.

• Whilethe‘•’isashingitispossible

to adjust the time using the Up and

Down buttons. Once the time has

been set, allow approximately 30

seconds before using any of the other

timer functions. This ensures that the

time will remain correct.

To select an alarm tone

There are three tones to choose from.

• Press and hold the down button to

listentothersttone.

• Release the down button and press it

again to listen to the second tone etc.

• Releasing the down button after the

tone has sounded will automatically

select that tone.

Setting the minute minder

• To set the Minute Minder, press the

Function button once. The bell sym-

bolwillappearandstartashing.The

ashingonlylastsfor5secondsso

the time must be set within this time

frame.

• Use the Up and Down button to set

the length of time required. Once this

has been done, the Minute Minder is

set.

• When the desired length of time has

counted down the alarm will sound.

• To cancel the tone, press any of the

buttons.

• To cancel the Minute Minder at any

time, press the Up and Down buttons

together.

USING THE CLOCK/PROGRAMMER-ELEC(if fitted)

11.100

Semi-automatic cooking

There are two types of semi automatic

cooking available on this appliance.

The oven must be switched on, and in use

to use either of these functions success-

fully.

The Duration method allows you to set the

ovenforaspeciclengthoftime.Ifadish

needed 2 hours to cook, then it would be

possible for you to set the oven to turn off

2 hours later. This allows you to be sure

that your food will be cooked for a set

length of time and no longer.

The End Time method allows you to enter

aspecictimewhenyouwouldlikethe

oven to switch off. If you wish to leave the

oven unattended, then it offers peace of

mind that the oven will have turned itself

off at the set time.

However, once the program is set then it

cannot be adjusted. Extra time cannot be

added, nor can the end time be extended.

To cancel the semi automatic programs,

press both the Up and Down buttons

together. This can be done at any time

during the cooking process. Then if neces-

sary, re program.

For the instructions on how to use both of

these functions, please see the following

page.

Fully automatic cooking

This function incorporates both a duration

and an end time and is meant to be used

when you wish to delay the start time.

Werecommendthattherstfewtimes

this function is used you are in the house,

this will familiarise you with your oven and

prevents food from being over cooked or

under cooked.

Care must be taken when selecting foods

for this function, it is not recommended

for certain food items which may spoil, or

are sensitive to being left.

It is also advisable to set the end time to

be as close to your return as possible to

prevent food being left standing.

USING THE CLOCK/PROGRAMMER-ELEC(if fitted)

11.100

SEMI-AUTOMATIC COOKING

The duration method

• Press the Function button twice,(1)

which will skip past the Minute

Minder.

• TheLEDdisplaywillashtheword

‘dur’,(2)andthe‘A’willashonthe

left hand side of the display.

• Use the Up and Down buttons to set

the length of time you want to cook

for.(3) This must be done within 5

seconds or the time of day will show

again.

Once this is done the oven will automati-

cally switch off once the time has elapsed,

and the alarm will sound.

To switch off the alarm, press any button.

To view any remaining time press the

function button twice.

The end time method

• Press the Function button three times,

which will skip past the Minute Minder

and the Duration programmer. (4)

• TheLEDdisplaywillashtheword

‘End’andthe‘A’willashontheleft

hand side of the display. (5)

• Use the Up and Down buttons to

select the time the oven is required to

turn off. (6)

Once this is done the oven will turn itself

off at the time you have selected.

To switch off the alarm, press any button.

USING THE CLOCK/PROGRAMMER-ELEC(if fitted)

11.100

FULLY AUTOMATIC COOKING (EX-

AMPLE)

This programming method is best suited

for when a delayed start time is required.

Unlike the semi automatic methods this

requires both the duration and the end

time to be entered. The timer will work

out the start time and begin cooking.

• Press the function button twice to

select the length of time your food

will need. (7)

• The‘A’onthelefthandsidewillash

andthe‘dur’messagewillashup.

(8)

• Using the Up and Down buttons set

the time you require within 5 seconds

of the ‘dur’ message. (9)

• Press the function button three times

untilthe‘A’ashesagainandthe

‘End’ messages appears. (10) & (11)

• Using the Up and Down buttons, set

the time you would like the oven to

switch off. (12)

• Set the temperature of the oven and

place the food inside.

While the automatic function is running,

the ‘A’ will appear statically on the display,

with the time.

Try to keep the end time as close to when

you expect to return, this will prevent

cooked food from being left standing in a

warm oven.

The timer will calculate the appropriate

start time.

To switch off the alarm, press any button.

USING THE CLOCK/PROGRAMMER-ELEC(if fitted)

11.100

The touch control programmer

There are three touch control icons for

this timer - the table below shows you

what the symbols look like, depending on

the model type, & their functions.

Note - some functions require you to

‘touch & hold’ an icon for a few seconds,

whilst others require you to just ‘touch’

the icon without holding.

Sym-

bol

Sym-

bol

What is it?

Down/minus

Used to decrease

cook / end time, re-

move minutes from

the minute minder

and adjust the time

of day. Also for lis-

tening to and setting

the alarm tone.

Up/plus

Used to increase

cook / end time,

add minutes to the

minute minder and

adjust the time of

day.

FUNC-

TION

MODE

Function icon

Used to select the

functions available

on this timer.

Touchoncefor:

Minute Minder.

Touchtwicefor:

Cook time

Touch three times

for:Endtime.

How to use these

functions is ex-

plained later on in

this section.

The ‘function’ icon in the centre is used for

setting the minute minder & setting up the

automatic cooking - see below for details.

Symbols on the LED display.

This ‘A’ symbol appears when either

a semi, or fully automatic program is

selected.Thissymbolwillashwhilea

program is being set.

Once a program is set the symbol will light

up, and remain lit until the alarm sounds,

or the program is cancelled.

This Bell symbol appears when the Minute

Minder function has been selected.

While the Minute Minder is being set, the

Bellsymbolashes.Oncethelengthof

time is set, the Bell symbol remains lit

until the time runs down, or the function

is cancelled.

This message and ‘A’ symbol appear when

you are asked to set the length of time

you require the oven to cook automatically

for. Using the Up and Down icons adjusts

this accordingly.

This message and ‘A’ symbol appear when

you are asked to enter in an end time, or

when you would like the oven to switch

itself off.

USING THE CLOCK/PROGRAMMER-ELEC(if fitted)

11.100

Setting the time of day

Touch & hold the centre (function) icon for

afewsecondsuntilthe●symbolbetween

thenumbersontheLEDdisplayashes.

Whilethe●symbolisashing,youcan

adjust the time of day by touching the

plus&minusicons.Pleasenote:thehours

& minutes adjust quickly.

Important - once the time of day has

been set, allow approximately 30 seconds

before using any of the other programmer

functions. This ensures that the time of

day will remain correct.

Setting an alarm tone

Touch & hold the plus & minus icons

simultaneouslyuntilthe●symbolashes

& you hear a beep - then touch the centre

(function) icon.

Touch the minus icon to select the tone.

You can change the tone by repeatedly

touching the minus icon - there are three

tones to choose from.

Setting the minute minder

To set the minute minder, touch & hold the

centre (function) icon until the bell symbol

appears&beginstoash.Important-the

ashingwilllastforapproximatelyve

seconds, so any setting must be carried

out within this time frame.

Touch the plus & minus icons to set the

length of time required. Once this has

been done, the minute minder is set.

When the desired length of time has

counted down, the alarm will sound. To

cancel the tone, touch & hold any of the

icons.

To cancel the minute minder at any time,

touch & hold the plus & minus icons

together.

Semi-automatic cooking

Method 1 - duration (switch off after

set time period):

Touch & hold the centre (function) icon;

thebellwillash&youwillhearabeep.

Touch the centre (function) icon again

- this will skip past the minute minder

function.

Thedisplaywillashtheword‘dur’&the

‘A’willashonthelefthandofthedisplay.

Use the plus & minus icons to set the

length of time you want to cook for. The

ashingwilllastforapproximatelyve

seconds, so the setting must be done

within this time frame or the time of day

will show again.

Once the duration has been set, the oven

will automatically switch off. When the set

time has elapsed the alarm will sound. To

switch the alarm off, touch any icon.

To view any remaining time, touch & hold

the centre (function) icon & touch again.

To cancel the semi-automatic programme

at any time, touch the plus & minus icons

together.

Method 2 - end time (switch off at a

set end time):

Touch & hold the centre (function) icon;

thebellwillash&youwillhearabeep.

Touch the centre (function) icon again

- twice - this will skip past the minute

minder & duration functions.

Thedisplaywillashtheword‘End’&the

‘A’willashonthelefthandofthedisplay.

USING THE CLOCK/PROGRAMMER-ELEC(if fitted)

11.100

Use the plus & minus icons to select the

time the oven is required to switch off.

Once this is done the oven will switch

itself off at the pre-selected time. To turn

the alarm off, touch any icon.

To cancel the semi-automatic programme

at any time, touch the plus & minus icons

together.

Fully automatic cooking

This function allows the cooker to switch

on & off automatically. It requires both the

duration & the end time to be entered.

The timer will work out the start time &

begin cooking.

Touch & hold the centre (function) icon;

thebellwillash&youwillhearabeep.

Touch the centre (function) icon again

- this will skip past the minute minder

function.

Thedisplaywillashtheword‘dur’&the

‘A’willashonthelefthandofthedisplay.

Use the plus & minus icons to set the

length of time you want to cook for. The

ashingwilllastforapproximatelyve

seconds, so the setting must be done

within this time frame or the time of day

will show again.

Touch the centre (function) icon again -

this skips past the minute minder & dura-

tion functions.

Thedisplaywillashtheword‘End’&the

‘A’willashonthelefthandofthedisplay.

Use the plus & minus icons to select the

time the oven is required to switch off.

Set the temperature of the oven & place

the food inside. The timer will calculate

the start time.

When this is done the oven will turn itself

off at the time you have selected. To

switch off the alarm, touch any icon.

To cancel the automatic programme at

any time, touch the plus & minus icons

together.

USING THE CLOCK/PROGRAMMER-ELEC(if fitted)

USING THE PROGRAMMER - TOUCH

1.0 Overview of symbols & functions:

Display symbols:

Minute minder

Cooking time

End of cooking time

Time of day

Child lock

Cooking pot

Automatic mode

Manual mode

Pyrolysis mode (OPTIONAL)

Acoustic signal

7-segment display

Max. adjustable minute minder

Max. adjustable cooking time

Displayhours:minutes

Displayminutes:seconds

1.1 Manual mode

The programmer remains in MANUAL mode if no COOKING TIME or END of COOKING

TIME is selected & the symbol is displayed. The TIME of DAY is shown on the

7-segment display unless the MINUTE MINDER is active.

1.2 Automatic mode

If a COOKING TIME or END of COOKING TIME is selected, the programmer switches to

AUTOMATIC mode. The symbol is displayed until the COOKING TIME or the END

of COOKING TIME has expired.

USING THE PROGRAMMER - TOUCH

2.0 Touch Control

Select a function

Plus - increase time or volume

Minus - decrease time or volume

2.1 Touch Controls

Touching the & symbols momen-

tarily increases or decreases the time by

one minute (or the volume of the ACOUS-

TIC SIGNAL by one step).

Touching the & symbols permanentlly

increases or decreases the speed of time

setting automatically.

2.2 Touch Control

Touching the FUNCTION symbol

momentarily, the next following function is

chosen. Touching the FUNCTION symbol

permanently causes no automatic change

& if touched for more than 10 seconds

an ACOUSTIC SIGNAL occurs & the

FUNCTION mode terminates automatically.

Within 5 seconds after selecting a

function, the time or signal volume can be

set by touching the & symbols.

USING THE PROGRAMMER - TOUCH

3.0 FUNCTIONS

3.1 Start of Function

When a function is selected & the time

or acoustic volume is set, the chosen

functionwillstartautomaticallyve

seconds after setting.

The display shows the current TIME of

DAY, except when the MINUTE MINDER is

active. In this case, the display shows the

remaining time of the MINUTE MINDER.

3.2 Power ON/initial operation

After connecting the appliance to the

mains, the display shows the default TIME

of DAY ashing.

In the event of a power failure, the oven

& grill elements will not automatically

switch on when power is resumed; thus,

on resumption of power, touch any of

the touch control symbols & the display

will show the default time

permanently. The colon & the symbol

continuetoash&thecurrentTIMEof

DAY can now be set.

3.3 Time of Day

Select the TIME of DAY mode by using

the FUNCTION symbol until the symbol

ashes;settheTIMEofDAYbyusingthe

+ or - symbols.

3.4 Acoustic Signal

Select the ACOUSTIC SIGNAL mode by

using the FUNCTION symbol until the

symbols or appear on the

display. The signal volume can be set

using the + or - symbols; the acoustic

signal sounds in the selected volume.

ACOUSTICSIGNALvolume:

= low

= medium

= loud

3.5 Minute Minder

Select the MINUTE MINDER mode by

using the FUNCTION symbol until the

MINUTE MINDER symbol isashing.

The MINUTE MINDER can be set using

the + or - symbols up to a maximum of

Five seconds after setting the MINUTE

MINDER, the count down starts in steps of

seconds. The display shows the MINUTE

MINDER symbol & the remaining time

is displayed continously. While setting

other functions the MINUTE MINDER

counts down in the background.

The remaining time can be changed at

any time by using the + or - symbols.

The countdown is deleted by setting the

MINUTE MINDER to .

The MINUTE MINDER time has expired

once it reaches ; the MINUTE

MINDER symbol ashes&the

ACOUSTIC SIGNAL is heard.

Touching any touch control symbol

automatically terminates the MINUTE

MINDER mode.

The ACOUSTIC SIGNAL & the MINUTE

MINDER symbol are switched off & the

current TIME of DAY is displayed.

3.6 Cooking Time

Select the COOKING TIME mode by using

the FUNCTION symbol until the COOKING

TIME symbol isashing.The

COOKING TIME can be set using the +

or - symbols up to a maximum COOKING

TIME of .

Five seconds after setting the COOKING

TIME, the MANUAL mode changes to the

AUTOMATIC mode, the COOKING POT

symbol & the current TIME of DAY are

displayed.

To change or delete the time, select

COOKING TIME mode until the COOKING

TIME symbol isashing.Thetime

is changed using the + or - symbols or

deleted by setting it to .

USING THE PROGRAMMER - TOUCH

Once the COOKING TIME has expired, the

ACOUSTIC SIGNAL is heard. The display

shows & the symbol

ashes.

After seven minutes maximum or after

touching any of the touch control symbols,

the ACOUSTIC SIGNAL stops but the

symbolcontinuestoash.Touchthe

FUNCTION symbol, the symbol is

displayed continously & the current TIME

of DAY is displayed, except if the MINUTE

MINDER is active.

3.7 End of Cooking Time

The END of COOKING TIME function

MUST be used in conjunction with

the COOKING TIME function. This is in

order to allow the user to set the START

TIME for the cooking to begin - see the

following section on DELAYED COOKING.

To select the END of COOKING TIME

mode keep touching the FUNCTION

symbol until the END of COOKING TIME

symbol isashing.TheENDof

COOKING TIME can be set using the + or

- symbols. The display shows the current

TIME of DAY plus the set COOKING TIME.

The latest END of COOKING TIME is

limited to the current TIME of DAY plus

Five seconds after setting, the MANUAL

mode changes to AUTOMATIC mode & the

display shows the COOKING POT symbol

& the current TIME of DAY.

To modify or delete the END of COOKING

TIME, select the function until the END of

COOKING TIME symbol isashing.

The END of COOKING TIME can be

modiedbyusingthe+or-symbols.

The END of COOKING TIME can be

deleted by counting back using the -

symbol until it equals the current TIME of

D AY.

The END of COOKING TIME has expired

- see COOKING TIME has expired

paragraph 3.6.

USING THE PROGRAMMER - TOUCH

3.8 Delayed Cooking

CalculationofSTARTTIMEasbelow:

ToselectDELAYEDCOOKING:

1. set the desired COOKING TIME - see

paragraph 3.6.

2. set the desired END of COOKING TIME

- see paragraph 3.7.

DELAYED COOKING run down - the

COOKING POT symbol is off until the

START TIME is reached. COOKING TIME

starts as soon as the START TIME is

reached at which time the COOKING POT

symbol is displayed.

To modify or delete DELAYED COOKING,

see paragraphs 3.6 COOKING TIME & 3.7

END of COOKING TIME.

DELAYED COOKING has expired - as

COOKING TIME - see paragraph 3.6.

3.9 Child Lock

The CHILD LOCK function can be activated

while the TIME of DAY is diaplayed in

MANUAL mode, regardless of whether a

COOKING TIME or an END of COOKING

TIME is running down in AUTOMATIC

mode.

CHILD LOCK function is activated by

touching the + symbol for a minimum of

vesecondsuntiltheCHILDLOCKsymbol

is displayed. From this moment on all

other functions are locked.

Exception:ifafunctione.g.COOKING

TIME has expired, the ACOUSTIC SIGNAL

can be terminated by touching any of

the touch control symbols, although the

CHILD LOCK is active.

Touching any of the touch control symbols

while the CHILD LOCK is activated results

in an ACOUSTIC SIGNAL & the CHILD

LOCKsymbolashesfortwoseconds.

The CHILD LOCK function is de-activated

by touching the + symbol for a minimum

ofvesecondsuntiltheCHILDLOCK

symbol switches off. From this moment

on all functions are selectable again.

Activating the CHILD LOCK in MANUAL

mode completely locks the aplliance & the

symbol is switched off. After de-

activation, as decribed above, the

symbol is displayed again.

The CHILD LOCK remains activated

after a power failure. Before re-newing

the settings, the CHILD LOCK has to be

deactivated, as described above.

CLEANING

12.000

General

• It is important to clean the product

regularly as a build up of fat can af-

fect its performance or damage it and

may invalidate your guarantee.

• Always switch off your appliance

and allow it to cool down before you

clean any part of it.

• Do not use undiluted bleaches,

products containing chlorides, wire

wool or abrasive cleaners on alu-

minium, stainless steel, or plastic/

painted parts as they can damage

the appliance. Nylon pads can also be

unsuitable.

• Take extra care when cleaning over

symbols on fascia panels. Excessive

cleaning can lead to the symbols

fading.

• Ifyourproductisttedwithstainless

steel cladding strips. You may notice

a small white residue on the outer

edges, this can be removed with a

non abrasive wipe.

• Some foods are corrosive eg; vinegar,

fruit juices and especially salt - they

can mark or damage the metal or

paint work, if they are left on the

surface.

• Only use a clean cloth wrung out in

hot soapy water, and dry with a soft

cloth.

Stainless steel & Aluminium surfaces

• Stubborn marks can be removed us-

ing a stainless steel cleaner. Supplies

can be purchased from the Customer

Care Centre.

• Sharp objects can mark the surface

of stainless steel, but will become

less noticeable with time.

• Baby oil can be used to restore stain-

lesssteelnishes-butonlyusea

few drops. Don’t use cooking oils

as they can contain salts, which will

damage the metal.

Enamel surfaces & parts

• If larger splashes of fat do not readily

disappear, you can use a mild cream

cleaner to remove them.

Glass parts

WARNING:- Do not use harsh

abrasive cleaners or sharp

metal scrapers to clean the

oven door glass since they can

scratch the surface, which may

result in shattering of the glass.

Chrome plated parts

• Useamoistsoaplledpad,orplace

in a dishwasher

CLEANING

12.100

REMOVING OVEN PARTS FOR

CLEANING

Inner Door Glass (glass doors only)

• The inner door glass panel can be

removed for cleaning but it must be

replaced the right way up. If there is

any writing on the glass, you must be

able to read it clearly when the cavity

doors are open.

• Always make sure that the glass is

pushed fully into the Stop position.

• To remove the glass panel, open the

door wide, hold the top and bottom

edges and slide out.

• Warning: Do not operate

the appliance without the

glasspanelcorrectlytted.

• For your safety, glass door panels are

made of toughened glass. This en-

sures that, in the unlikely event that

a panel breaks, it does so into small

fragments to minimise the risk of in-

jury. Please take care when handling,

using or cleaning all glass panels, as

any damage to the surfaces or edges

may result in the glass breaking

without warning or apparent cause at

a later date. Should any glass panel

be damaged, we strongly recommend

that it is replaced immediately.

Shelf Runners

• Shelf runners can be removed to

enable you to clean them thoroughly.

Make sure they are cool to touch and

then grasp the runners and slide out

of their hanging holes.

Pull out to clean

CLEANING

12.110

TELESCOPIC SHELVING SYSTEM

(if tted)

• In addition to the traditional shelving

ttedinyourappliance,thetele-

scopicshelvingsystemisttedinthe

most commonly used location in your

cavity.

• The shelves with the telescopic

system are easier to pull out than

traditional shelving, which means the

oven door stays open for a shorter

period of time. The smooth action

also reduces the likelihood of fat, or

food, spillage, and gives you extra

security.

• You do not have to use the telescopic

shelves all of the time. You can place

the shelves in the traditional positions

if you would like more choice.

• The telescopic shelves remove easily

from the runner for re-positioning

or cleaning, but we recommend that

you reposition your shelving before

cooking, and remove the shelving for

cleaning when the shelves are cold to

prevent burning yourself.

To remove the telescopic shelves

• Make sure the shelf is cool enough to

touch.

• Push the oven shelf back into the

cavity, until it hits the stop position.

• Grasp the shelf bars in the centre,

and lift the back of the shelf clear of

the stop position.

• You can then lift the front of the shelf

clear of the retaining tabs.

To replace the telescopic shelves

• Make sure the oven runners are

pushed all the way back into the

cavity.

• Tilt the shelf and make sure the front

of the shelf is against the stop posi-

tion.

• Carefully place the shelf back onto

therunnerandsnapinplacermly.

• Make sure the back of the self is

inside the retaining tabs and slide it

in and out of the oven to make sure

it works correctly.

1. Grasp and

lift shelf bars

2. Lift shelf

clear

Note: Make sure the shelf is

unclipped from the retaining

tabs before removal.

Make sure the shelf

is firmly pressed against

the stop position at

back of the oven cavity

INSTALLATION

13.010

STEP 1 : PREPARE INSTALLATION

Do not lift the appliance by the door

handle.

Whilst every care is taken to elimi-

nate burrs and raw edges from this

product,please take care when handling

- we recommend the use of protective

gloves during installation.

Please note that the weight of this

appliance is approximately 31kg

(unpacked). Take care when lifting it

into the housing unit - always use an

appropriate method of lifting.

Removethexingscrewsfromthe

polythene bag on the top of the appli-

ance, but leave the appliance in the base

tray packaging until you are ready to

install it.

If this appliance is to be installed near to

a corner where the adjacent cabinets run

at right angles forward of the appliance,

there must be a gap of at least 90 mm

between the appliance and the cabinets,

to prevent overheating of the cabinets.

Housing dimensions

Theapplianceisdesignedtotintoa

standard 600mm wide housing unit with

minimum internal dimensions as shown.

590mm is to the underside of the worktop

when the appliance is built under, or to

the underside of the panel above, when

the appliance is installed into a tall

housing unit.

13.010

INSTALLATION - 60CM

i) When installed in a typical 600mm deep

built in housing unit, the false back should

be removed from the housing unit to

provide the necessary depth for

installation.

ii) When the false back is removed, it is

normally the case that the support shelf

for the appliance leaves a gap between

the back edge and the wall of

approximately 80mm.

iii) If no gap occurs between the back

edge of the shelf and the wall behind the

unit, we recommend that a gap of at least

30mm is made by shortening the shelf.

iv) When installing the appliance below a

worktop, there must be a minimum

ventilation area of 60cm2 below the

appliance, in either area (1) or (2), as

indicated below. There must be a 5mm

gap between the front top edge of the

oven and the underside of the worktop.

Important:

Do not modify the outer panels

of this appliance in any way.

Ensure that you route all mains electrical

cablesandexibletubingwellclearofany

adjacent heat source, such as an oven,

grill or hob.

Ensure that all pipe work is of the correct

rating for both size and temperature.

Installing the appliance under a

worktop

Where the appliance is installed under

a worktop, with a hob installed above it,

the installation instructions for the hob

must be read in conjunction with these

instructions.

13.010

INSTALLATION - 70CM

Before you start

Please read the instructions carefully -

planning your installation will save you

time and effort.

Look at the different ways the appliance

can be installed - as shown on the

following pages - and plan the installation

to suit your situation.

Leave the appliance in the base tray

packaging until you are ready to install

it. When you remove the appliance from

the base tray packaging, take care not to

damage it.

Whilst every care is taken to eliminate

burrs and raw edges from this product,

please take care when handling - we

recommend the use of protective gloves

during installation.

Please note that the weight of this

appliance is approximately 47kg

(unpacked). Take care when lifting it into

the housing unit - always use an appropri-

ate method of lifting.

This appliance must be installed only at

low level - ie; under a worktop. The

controls have been designed for viewing

at a low level, and it should therefore not

be installed at high level.

Please note that all dimensions and sizes

given are nominal, some variation is to be

expected.

If this appliance is to be installed near to

a corner where the adjacent cabinets run

at right angles forward of the appliance,

there must be a gap of at least 90mm

between the appliance and the cabinets,

to prevent overheating of the cabinets.

Important: Do not modify the outer

panels of this appliance in any way.

Fixingscrews-Thexingscrewsareina

polythene bag in the oven pack. Depend-

ing on the method of installation, some of

the screws may not be needed.

Step1:Prepareforinstallation

There are 3 methods of installing the ap-

pliance:

• Method1:Intoaspacebetweentwo

base units, ie; without a housing unit.

• Method2:Intoahousingunit,

with an internal height of less than

710mm,whichcanbemodiedtoob-

tain the required dimensions.

• Method3:Intoahousingunit,with

an internal height of 710mm or more.

If you have a non standard size of

cabinet which leaves a gap above or

below the appliance, you may be able

tobuyatrimkit(tollinthegap)

from the supplier of your cabinets.

Quantity Colour Description For Fixing

6 Silver No 8 x 12mm long

Self tapping screw

Runners to appliance

12 Black No 8 x 12mm long

Chipboard screw

Runners and sidetrims to

cabinet or housing

6 Black No 8 x 25mm long

Chipboard screw

Appliance to cabinet

2 Silver No 8 x 12mm long

Self tapping screw

Appliance to sidetrims

13.010

INSTALLATION - 70CM

METHOD 1: WITHOUT HOUSING

UNIT(BETWEEN 2 BASE UNITS)

Before installing the appliance, check the

internal dimensions as shown.

The space for the appliance must be clear

of obstruction. You may have to cut into

or remove any rear cross members to

obtain the 550mm minimum depth.

The Fixing Kit

Shouldyouneedareplacementxingkit

please call the customer care helpline and

orderpartnumber:012828700.

Inthexingkityouwillnd2sidetrims

(687mm long) and 4 runners (420mm

long).Thexingscrewsareinapolythene

bag in the oven.

1. Take the 6 No 8 x 12mm (silver) self

tapping screws from the polythene bag,

andusethemtotonerunnertoeach

side of the appliance.

2. Make sure they are the right way up as

shown.

3. Take one of the side trims, hold it

against the side of the base unit, and

mark off 687mm from the top edge of the

base unit, to the top edge of the runner.

Note:Thisensuresa5-8mmclearance

from the underside of the worktop to the

top of the appliance.

4. Measure 50mm from the front edge of

the base units, to mark the front edge of

the runners.

5. Take 6 of the No 8 x 12mm (Black)

chipboard screws and screw the runners

into opposition the right way up as shown.

6.Fitthesidetrimstobeushtothetop

and front edges of the base units, using

the remaining 6 No 8 x 12mm (Black)

chipboard screws.

13.010

INSTALLATION - 70CM

METHOD 2: HOUSING UNIT WITH

INTERNAL HEIGHT LESS THAN

710MM

Note:Youwillnotneedthe2sidetrims

(687mm long) or the appliance runners

for this installation. You will need the 2

runnerstoxtotheadjacentcabinets.

Before you start;

Before removing the bottom shelf or

modifying the housing unit, make sure

that it will remain structurally sound, eg;

byxingtoadjacentcabinets,ooror

worktop.

You may have to cut into or remove any

rear cross members to obtain the 550mm

minimum depth.

To obtain the required 710mm height, you

may have to lower or remove the bottom

shelf - remove any cross rails and reposi-

tion brackets.

Toxtherunners(ifrequired)

1. Take the side trims, hold it against the

side of the base unit, and use it to mark

off the 687mm from the top edge of the

side unit, to the top edge for the runner.

Note:Thisensuresa5-8mmclearance

from the underside of the worktop to the

top of the appliance.

2. Measure 50mm from the front edges of

the base units, to mark the front edge for

the runners.

3. Take 6 of the No 8 x 12mm (Black)

chipboard screws and screw the runners

into position the right way up as shown.

4. If necessary, adjust the height of the

plinth to just below the bottom edge of

the runners.

Ifyourequireareplacementxingkit

please call the customer care helpline and

order part number 01 28287 00.

13.010

INSTALLATION - 70CM

Method 3: Housing unit with internal

height 710mm or more

Note:Youwillnotneedthe4runnersand

2 trims that are packed with the oven for

this installation.

1. When installed in a typical 600mm

deep built in housing unit, the false back

should be removed from the housing unit

to provide the necessary depth for

installation.

2. When the false back is removed, it is

normally the case that the support shelf

for the appliance leaves a gap between

the back edge and the wall of approxi-

mately 80mm.

3. If no gap occurs between the back

edge of the shelf and the wall behind the

unit, you must create a gap of at least

30mm by shortening the shelf.

Removeanyxingsthatmayprevent

entry of the oven into housing, or

obstruct the gas inlet pipe. The cabinetry

should be kept structurally sound by

xingtoadjacentcabinets,ooror

worktop.

13.010

INSTALLATION - 90CM

STEP1:PREPAREINSTALLATION

Do not lift the appliance by the door

handle.

Removethexingscrewsfromthe

polythene bag on the top of the appliance,

but leave the appliance in the base tray

packaging until you are ready to install it.

Whilst every care is taken to eliminate

burrs and raw edges from this appliance,

please take care when handling - we

recommend the use of protective gloves

during installation.

Please note that the weight of this

appliance is approximately 48kg

(unpacked). Take care when lifting it

into the housing unit - always use an

appropriate method of lifting.

Note:Whenremovingtheappliancefrom

the base tray packaging care should

be taken to ensure the appliance is not

damaged.

Siting the appliance

If this appliance is to be installed near to

a corner where the adjacent cabinets run

at right angles forward of the appliance,

there must be a gap of at least 90mm

between the appliance and the cabinets,

to prevent overheating of the cabinets.

When installed in a typical 600mm

deep built in housing unit, the false back

should be removed from the housing

unit, to provide the necessary depth for

installation.

When the false back is removed, it is

normally the case that the support shelf

for the appliance leaves a gap between

the back edge of the support shelf and the

rear wall of approximately 80mm.

If no gap occurs between the back edge

of the shelf and the wall behind the unit,

you must create a gap of at least 30mm

by shortening the shelf and any other

shelf below the appliance.

Cut 12mm from the top of any plinth that

maybetted(seediagram).

Important:Donotmodifytheouter

panels of this appliance in any way.

13.010

INSTALLATION - 90CM

Dimensions

Theapplianceisdesignedtotintoa

standard 600mm wide housing unit, with

minimum internal dimensions as shown.

Note:Allsizesarenominal,somevariation

is to be expected.

INSTALLATION

13.010

STEP 2 & 3 CONNECT TO THE ELEC-

TRICITY SUPPLY

We recommend that the appliance is

connected by a competent person who

is a member of a “Competent Person

Scheme” & who will comply with the

I.E.E. & local regulations.

Important:Ensurethatyourouteall

mains electrical cables well clear of any

adjacent heat source, such as an oven or

grill.

Warning:Thisappliancemustbeearthed.

For 60cm BI appliance:

1.Whereaxedconnectionisused,

a device allowing the appliance to be

isolated on all poles from the mains

supply with a contact opening width of at

least 3mm must be provided.

Use a 13 amp fuse.

2. A type HO5 V V-F cable must be used

as the mains lead. The cross section must

be a minimum of 1.5mm².

3. The mains terminal block is located

at the right hand rear of the top service

panel.

4. Connect the cable to the terminal block

& tighten the cable clamp.

5. Close the terminal box, ensuring the

cover is engaged on the locking tabs.

For 70/90cm appliances:

1. The appliance must be installed using

a double pole control unit of 32 ampere

minimum capacity separation at all poles.

2. Access to the mains terminal is gained

by opening the terminal block cover at

therearoftheappliance(useasmallat

bladed screwdriver).

3. Connection should be made with

suitabletwin&earthexiblecable,

minimum 4mm² , which is suitable for use

up to 25 amps.

4. First strip the wires, then push the

cable through the cable clamp in the

terminal block cover.

5. Connect the cable to the terminal block

& tighten the cable clamp screw.

6. Close the terminal box, ensuring that

the cover is engaged on the locking tabs.

13.010

INSTALLATION

STEP 4: SECURE APPLIANCE INTO

HOUSING UNIT

Note:Theunithousingtheappliance

mustbeappropriatelyxed.Ensurethat

the appliance is centrally located. Take

care not to damage the appliance or

cabinetry.

70cm only

Method1:Caremustbetakentoensure

theappliancerunnersaresufciently

engaged over the top of the runners on

the base units.

Method2:Insertapplianceintothecabi-

net - ensure that it is engaged over the

top of the side runners.

Method3:Insertapplianceintocabinet

Note:ForinstallationMethod1,youwill

needtodrillthroughthexingholesinto

the side trims with a 3.2mm diameter drill.

There are 4/6 black no 8 x 25mm long

chipboard screws for securing appliance

to cabinet. Insert appliance into cabinet

and secure.

60cm ovens

- Open the oven door and screw the 4

xingscrewsthroughtheholesinthe

front frame.

70/90cm ovens

- Open the grill / top oven door, and screw

2xingscrewsthroughthetopcorner

holes in the front frame.

- With the grill / top oven door still open,

screw2xingscrewsthroughtheholes

located under the grill compartment.

Close the grill / top oven door.

- Open the main oven door and screw 2

xingscrewsthroughthebottomcorner

holes in the front frame.

60/70/90 xing positions

13.010

INSTALLATION

Anti-stain trim (if tted)

Theanti-staintrimisfactoryttedto

the edges of the appliance front frame.

This trim provides the cabinetry with

extra protection from any escape of heat.

- When Installing the product, ensure

the anti-stain trim is correctly located

on the edges of the front frame, before

positioning and securing the appliance to

the cabinet.

-Whensecuringtheappliance,thexing

screws provided are driven through the

anti-stain trim into the cabinet.

Note:Whensuppliedtheanti-staintrim

may be loose and is only supported by

plastic rivets. The anti-stain trim will be

securedwhenthexingscrewsarefully

home into the cabinet. The plastic rivets

should not be removed.

Edging strip (if tted)

Theedgingstripisfactoryttedto

the edges of the appliance front frame.

This strip provides the cabinetry with ex-

tra protection from any escape of heat.

When installing the product, ensure

that the edging strip is correctly located

on the outer edges of the front frame,

before positioning and securing the

appliance to the cabinet.

Whensecuringtheappliance,thexing

screws provided are driven through the

edging strips into the cabinet - the seal

willstraightenupandsitushtothe

cabinet when the screws are fully home.

TECHNICAL DATA

14.002

ELECTRIC PRODUCTS

Electrical supply/load

220 - 240V ~ 50Hz

BuiltIn60cm:1.7kW-2.3kW

BuiltIn60cmInduction:2.8kW-3.4kW

BuiltIn70cm/90cm:4.1kW-5.1kW

Countries of destination

GB - Great Britain, IE - Ireland,

Warning: This appliance must be earthed.

Tond the electricalsupplyforyourpar-

ticular appliance, please refer to the data

badge.

The data badge is located at the rear of

the appliance.

CUSTOMER CARE

15.010

FAQs

What parts of the appliance can be

washed in a dishwasher?

• Any enamelled parts such as the grill-

pan can be cleaned in a dishwasher,

as can oven shelves and shelf guides.

What parts must NOT be cleaned in a

dishwasher?

• Parts such as burner skirts and caps,

control knobs and any cast iron items

must not be cleaned in a dishwasher,

they should be cleaned with hot

soapy water and a nylon brush once

they are cool enough.

There’s been a power failure and the

product won’t work.

• Switch off the electricity supply.

• When the power returns switch the

electricity supply back on and re-set

any programmer/clock to the correct

time of day.

My oven is a single combined oven

and grill - can I use both functions

together?

• No. You can only use one or the

other.

Why is there condensation on the

doors?

• Condensation is caused by hot, moist

air meeting a cooler surface (i.e. the

oven door). You cannot always pre-

vent it, but you can minimise it when

ithappensbydoingthefollowing:

• Pre-heat the oven at a high tempera-

ture before putting food in the oven,

and cover the food you are cooking

wherever possible.

• Whenever you can, cook wet foods at

higher temperatures.

• Don’t leave food in the oven to cool

down.

• Automatic cooking will normally pro-

duce condensation when the oven is

cooling down with food inside.

Why is there steam or smoke escap-

ing from the oven?

• Yourovenisttedwithasteamvent

at the top of the main oven. This is

to allow excessive steam out of the

oven whilst cooking wet foods such

as quiche or pizza.

• If your main oven smokes during

its use, it is important that the oven

cavity is kept clean and not contami-

nated with grease or old foods.

Should the cooling fan continue to

run once the appliance has been

switched off?

• Yes.Yourovenisttedwithacooling

fan to keep the operator controls

cool. In some cases the cooling fan

may continue to run even after the

oven is switched off to disperse the

residual heat of the oven.

What is a Multifunction oven?

• A multifunction oven combines a va-

riety of features, which are explained

fullyearlierinthisbook(iftted),

itallowsyoumoreexibilitywhen

cooking.

The neon on my appliance keeps go-

ing out and coming back on again.

• Yes.Inmostcasestheneon(iftted)

will cycle on and off to show that

oven is maintaining your temperature

choice.

My new oven is giving off a strange

smell?

• This is the smell of the oven being

usedforthersttime.Afterasmall

period of uses, the smell will deterio-

rate. Whilst inside the oven your food

will never be polluted by this smell.

Call Customer Care for a Service

Engineer’s visit if:

• Youndthattheovenbecomeshot-

ter at a particular temperature - the

thermostat may need replacing.

• The cooling fan fails to work.

CUSTOMER CARE

15.030

CUSTOMER CARE WEB SHOP

Having purchased a superior cooker, hob

or hood from us, you’ll naturally want to

keep it looking great. And who better to

help you care for it than the manufac-

turer?

We offer an extensive range of accesso-

ries, components and cleaning products

which, will instantly give your cooker a

good as new look.

In addition to the list of our most popular

products below, we also have an exciting

range of Bake ware and Cookware essen-

tials including Roasting Pans, Cake Tins

and Non-Stick Cooking Liners.

For all enquires, please visit our Web

Shop at www.gdhaonline.co.uk or

call the Spares Sales Team on 0844

815 3745. For countries outside the UK,

please contact your local service agent.

Product De-

scription

Where used Purpose

Ceramic Hob

Cleaner

All Ceramic glass

hobs including

Induction

Enables easier cleaning of your ceramic hob.

Prevents build up of mineral deposits. Best

used with Ceramic Hob Scraper Kit. 300ml

bottle.

Ceramic Hob

Scraper kit

All Ceramic glass

hobs including

Induction

Ideal for removing cooked on marks from

ceramic glass hobs Best used with Ceramic

Hob Cleaner

Sealed Hotplate

Conditioner

All sealed/solid

plate hobs

Restoresthesleekmattblacknishtosolid

hotplates

Multipurpose

Kitchen Cleaner

General kitchen

cleaner

Excellent multipurpose cleaner, For use

around the kitchen. 500ml bottle.

Oven Cleaner

All cooking appli-

ances.

Cuts through grease & burnt on grime. 500ml

bottle

Restor-A-Cloth

All cooking appli-

ances.

Chemical free cleaning cloth Ideal for clean-

ing & polishing glass & stainless steel

Stainless Steel

Cleaner

All stainless steel

parts

Oil based cleaner. Perfect for removing stub-

born & greasy marks. 300ml bottle.

Rectangular car-

bonlters

Cooker Hoods

Newlters,helptomaintainefcientcooker

hood operation and keep your Kitchen odour

free

Round Carbon

Filters

Cooker Hoods

Newlters,helptomaintainefcientcooker

hood operation and keep your Kitchen odour

free

CUSTOMER CARE

15.040

CUSTOMER CARE

CHANGING LIGHT BULBS

(where tted)

Warning: There is a risk of electric shock, so always make

sure you have turned off and unplugged your appliance before

starting. Always allow the product to cool down before you

change a bulb.

Not all appliances have the same number and type of bulbs. Before replacing your

bulb, open the oven door and see which type you have. Then use the table to help you

change your bulb correctly.

Bulbs can be purchased from hardwarestores (always take the old bulb with you).

Please remember that bulbs are not covered by your warranty.

No of Lamps Instructions

1 Remove the oven shelves.

Remove the loose oven back by unscrewing the 4 securing screws

(oneateachcorner)andremove(Wheretted).

Unscrew the lens cover by turning anticlockwise.

Remove the bulb and replace.

Replace the lens cover and oven back.

Please keep this handbook for future reference, or for anyone else

who may use the appliance.

Please keep this handbook for future reference, or for anyone else

who may use the appliance.

Please keep this handbook for future reference, or for anyone else

who may use the appliance.

CUSTOMER CARECUSTOMER CARE

To contact Stoves about your appliance, please call

Warranty Registration

0844 481 0182

to register your appliance

Customer Care Helpline

0844 815 3740

incaseofdifcultywithintheUK

Alternatively general, spares and service information is available from our website at

www.stoves.co.uk

Please ensure that you have the product’s model no and serial no available when you

call.Thesecanbefoundonthesilverdatalabelonyourproductwhichislocated:

Ovens Open the door; adjacent to the oven cavity

High-level grill products Inside the base compartment

Hobs On the underside of the product

Enterappliancenumbershereforfuturereference:

Model No

Serial No

SERVICE RECORD

Date of purchase Installed by Installation Date

Placeofpurchase:

Date Part(s) replaced Engineer’s name

For customers outside the UK and Northern Ireland, please contact your local supplier.

Glen Dimplex Home Appliances, Stoney Lane, Prescot, Merseyside, L35 2XW

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stoves Sterling 900MF in the language / languages: English as an attachment in your email.

The manual is 3,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stoves Sterling 900MF Manual

Product: