706333
7
Zoom out
Zoom in
Previous page
1/40
Next page
EN - 7
1.2 Installation warnings
Before using your fridge freezer for the rst
time, please pay attention to the following
points:
The operating voltage for your fridge
freezer is 220-240 V at 50Hz.
The plug must be accessible after
installation.
Your fridge freezer may have an odour
when it is operated for the rst time.
This is normal and the odour will fade
when your fridge freezer starts to cool.
Before connecting your fridge freezer,
ensure that the information on the
data plate (voltage and connected
load) matches that of the mains
electricity supply. If in doubt, consult a
qualied electrician.
Insert the plug into a socket with an
efcient ground connection. If the
socket has no ground contact or the
plug does not match, we recommend
you consult a qualied electrician for
assistance.
The appliance must be connected
with a properly installed fused socket.
The power supply (AC) and voltage at
the operating point must match with
the details on the name plate of the
appliance (the name plate is located
on the inside left of the appliance).
We do not accept responsibility for
any damages that occur due to
ungrounded usage.
Place your fridge freezer where it will
not be exposed to direct sunlight.
Your fridge freezer must never be
used outdoors or exposed to rain.
Your appliance must be at least 50
cm away from stoves, gas ovens and
heater cores, and at least 5 cm away
from electrical ovens.
• If your fridge freezer is placed next
to a deep freezer, there must be at
least 2 cm between them to prevent
humidity forming on the outer surface.
Do not cover the body or top of fridge
freezer with lace. This will affect the
performance of your fridge freezer.
Clearance of at least 150 mm is
required at the top of your appliance.
Do not place anything on top of your
appliance.
Do not place heavy items on the
appliance.
Clean the appliance thoroughly before
use (see Cleaning and Maintenance).
The installation procedure into a
kitchen unit is given in the installation
manual. This product is intended to be
used in proper kitchen units only.
Before using your fridge freezer,
wipe all parts with a solution of warm
water and a teaspoon of sodium
bicarbonate. Then, rinse with clean
water and dry. Return all parts to the
fridge freezer after cleaning.
Use the adjustable front legs to make
sure your appliance is level and
stable. You can adjust the legs by
turning them in either direction. This
must be done before placing food in
the appliance.
Install the two plastic distance guides
(the parts on the black
vanes -condenser- at
the rear) by turning it
90° (as shown in the
gure) to prevent the
condenser from
touching the wall.
The distance between the appliance
and back wall must be a minimum of
75 mm.
1.3 During Usage
Do not connect your fridge freezer to
the mains electricity supply using an
extension lead.
Do not use damaged, torn or old
plugs.
Do not pull, bend or damage the cord.
Do not use plug adapter.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stoves ST444989 Breeze 190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stoves ST444989 Breeze 190 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info