659730
17
Zoom out
Zoom in
Previous page
1/24
Next page
installation
Fitting into worktop
Cut a hole in the work surface to the
required size. The worktop must be of
heat-resistant material or covered with
heat-resistant material.
Protecting the cut-out;
The types of chipboard used for work
surfaces swell relatively quickly in contact
with humidity.
Apply a suitable sealant to the cut edge to
protect it from moisture ingress.
This hob can be installed conventionally
(glassabovetheworktop)orrecessed
intotheworktopforausht.
Self adhesive seal
Apply the self adhesive seal to the
underside edges of the hob glass. For best
results, the seal should be adhered along
each side in turn, as close to the edge as
possible, and trimmed at each corner, tak-
ing care to ensure a neat join.
Conventional Installation
Refer to the installation bracket advice
to determine your installation type. Place
the hob in the aperture, checking the hob
glass is covering the work top along all
four sides.
Set the front edge of the appliance paral-
lel with the front of the work top.
Locate and attach the securing clamps
as required, Tighten the screws so that
thehobispulleddownrmlyagainstthe
worktop, thus ensuring a good seal.
Recessed Method
Recess the work top to the appropriate
depth(Approx5mm)andshapetotthe
hob(add1mmtooverallglasssize).Refer
to the installation bracket advice to deter-
mine your installation type. Insert the hob
into the recess, ensuring that the foam
seal is sitting correctly. Locate and attach
the securing clamps as required, Tighten
the screws so that the hob is pulled down
rmlyagainsttheworktop,thusensuring
agoodseal.Youmaywanttollanygap
between the hob top glass and the work
top surface with silicone sealant.
DO NOTtsiliconesealantunderthe
glass hob instead of the self adhesive seal.
1
SELF ADHESIVE SEAL
Worktop Hob
CONVENTIONAL INSTALLATION
1
Worktop
Hob
RECESSED METHOD
2
1
2
1
SELF ADHESIVE SEAL
SILICONE SEALANT
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stoves SEH600CTC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stoves SEH600CTC in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info