813457
4
Zoom out
Zoom in
Previous page
1/16
Next page
4
AIR CONTROLS
Nominal Running
Off
(Maximum Out)
OR
Smoke Control
Setting (if enabled)
Maximum Running
Start Up
(Maximum In)
Wood Models Multi-fuel Models
Wood Maximum Running
(Maximum out)
Off / Smoke Control
Setting (If enabled)
Multi-Fuel Running
Start Up
(Maximum In)
*
IMPORTANT NOTES - GENERAL
Before lighting the stove check with the installer that the installation work and commissioning checks have been
carried out correctly and that the chimney has been swept clean, is sound and free from any obstructions.
As part of the stoves’ commissioning and handover the installer should have shown you how to operate the stove
correctly.
Never use gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid, ethyl alcohol or similar liquids to start
or "reignite" a fire in the heater. Keep all such liquids well away from the heater while it is in use.
USING THE APPLIANCE FOR THE FIRST TIME
To allow the appliance to settle, and fixing glues and paint to fully cure, operate the appliance at a low temperature for
first few days.
Do not touch the paint during the first period of use.
During this time the appliance may give off some unpleasant odours. Keep the room well ventilated to avoid a build-up
of fumes.
Please be aware that during use, rope seals may discolour. This is normal.
Set the air controls to 50% to keep the appliance ventilated and
stop the build-up of any moisture inside when the appliance is
not in use for long periods of time.
If there is still burning fuel in the firebox, do not shut down
the air controls completely unless there is a chimney fire in
progress.
Closing the controls during the burning process will cause poor
combustion and could lead to a build up of gasses that could
ignite dangerously.
Always have enough air entering the stove to maintain some
flame within the firebox.
If it is necessary to shut down the appliance, run on a high
setting until all of the fuel has been burnt before closing the air
controls.
Close air controls when not in use after the burning process is
completely finished.
* In order to achieve the wood nominal (eco) output,
the control needs to be set halfway between the
off/smoke control setting indent and the wood
maximum running indent.
(Note: there is no indent to indicate this setting).
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax Vision at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax Vision in the language / languages: English as an attachment in your email.

The manual is 2.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stovax Vision

Stovax Vision Installation Guide - English - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info