813457
31
Zoom out
Zoom in
Previous page
1/44
Next page
31
DO NOT undo the catch more than 3-4mm.
Box Section
Appliance Body
Half Lock
Nuts
Dome
Catch
Ensure the dome catch is in an upright position with the at sides
parallel with the side of the appliance.
Dome Catch
Door Catch Slider
Side of Appliance
When the door closes the Dome Catch should sit centrally in the
slot of the door catch slider.
Adjust the height of the catch so that the door locking mechanaism
makes contact slightly above the point of the Dome Catch.
Dome
Catch
Point of
Dome
Appliance
Body
Positioning the catch
too low will not allow the
locking mechanism to
drop far enough over the
Dome to secure the door
if the metal expands in
the heat
Locking
Mechanism
Door
Casting
Incorrect Position - Dome catch too low
Dome
Catch
Point of
Dome
Appliance
Body
When the catch is in
the correct position the
locking mechanism can
slide over the Dome
and drop far enough to
secure the door
Locking
Mechanism
Correct Position
Dome
Catch
Point of
Dome
Appliance
Body
Positioning the catch
too high will not allow
the locking mechanism
to slide over the Dome
and fasten securely in
place
Locking
Mechanism
Door
Casting
Incorrect Position - Dome catch too high
To ensure a rm hold by the locking mechanism, the catch shoul
be positioned to allow the maximum distance of travel up and down
over the tapered end of the catch.
Note: If the point of the Dome Catch is in line with the bottom
of the locking mechanism this will prevent the door from
being pushed closed, too high and the catch won't travel far
enough down the other side of the catch to hold the door if the
metal expands when hot.
Fully tighten the lock nuts to secure the Dome Catch.
Open and close the door several times to the check the adjustment.
FINAL CHECKS
Following these adjustments check that the door:
— Does not come into contact with the log guard.
— Passes the paper sealing test.
Aligns with the sides and top of the appliance.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax Vision at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax Vision in the language / languages: English as an attachment in your email.

The manual is 5.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stovax Vision

Stovax Vision User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info