813429
24
Zoom out
Zoom in
Previous page
1/44
Next page
24
Installation Instructions
1. Installing the Appliance
Each installation is unique to the property so it is not possible
to give details to suit every setting. The installation must comply
with Building Regulations and be made using "best practice"
construction methods.
Many fireplace openings have a supporting lintel. Do not remove
without supporting the remaining structure of the building. Do not
support the structure or the flue system with the appliance.
1.1 Take care when installing the appliance. Careless handling
and use of tools can damage the finish and/or area.
This appliance is designed to be controlled by a
thermostat which regulates the rate fuel is burnt
and the amount of heat produced to hot water.
Note: It is recommended that the thermostat is fitted
before the appliance is installed. For installation
details refer to the instructions (PM747) supplied
with the thermostat kit.
1.2 Choose top or rear flue exit, see Diagram 1.
1
Top Rear
Hexagonal bolts
and washers
Hexagonal bolts
and washers
Fit flue collar and blanking plate to suit.
Attach flue collar to top or rear with hexagonal bolts,
see Diagram 1.
Seal collar with fire cement.
Secure blanking plate with hexagonal bolts, see Diagram 2.
Hexagonal Nuts &
Washer
2
Ensure that the heating system, including pipework, has
been carefully planned before installation.
Hearth Fixing
The appliance must be fixed to the hearth in at least two
positions.
1.3 Position the appliance where required on the hearth and mark
the location of the two fixing holes in the hearth mounts.
1.4 Drill the required sized holes into the hearth.
1.5 Use suitable fasteners to fix in place.
Front View Rear View
Fixing holes in
hearth mounts
Fixing holes in
hearth mounts
3
Glass Top - Optional
This appliance can be fitted with an optional glass top plate.
The type of plate will depend on whether the appliance is
installed with a to or rear flue exit.
The glass top must be fitted at the same time as the flue
connection.
Top Flue Rear Flue
View 8 VW-8GB VW-8GBR
1.6 The glass top plate has 2 ceramic feet on the bottom to
space it off the top of the appliance by 6mm and allow the
door to open freely.
Ceramic Rope
4
1.7 Place the glass top plate feet down on top of the appliance.
Ensure the glass top is flush with the front and sides of
the appliance.
England and Wales – Document J / Scotland -
Part F/Document J (Republic of Ireland only)
the latest edition of BS 8303, BS EN 15287,
BS 7566
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax View High Output Boiler Stoves at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax View High Output Boiler Stoves in the language / languages: English as an attachment in your email.

The manual is 4.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info