813455
35
Zoom out
Zoom in
Previous page
1/48
Next page
35
Lift the door catch slider until it disengages from the dome
catch and the door opens.
6.2 Use a 13mm A/F spanner to loosen the half lock nuts either
side of the appliance body. This will allow the dome catch to
rotate in and out, see Diagram 7.
DO NOT undo the catch more than 3-4mm.
7
Dome catch
Washer Stove body
Half lock nuts
6.3 Ensure the dome catch is in an upright position with the flat
sides parallel with the side of the appliance, see Diagram 8.
Dome Catch
Door Catch Slider
Side of Appliance
8
When the door closes the Dome Catch should sit centrally in
the slot of the door catch slider.
6.4 Adjust the height of the catch so that the door locking
mechanism makes contact slightly above the point of the
Dome Catch, see Diagrams 9, 10 & 11.
9
Dome
Catch
Point of
Dome
Appliance
Body
Positioning the catch
too low will not allow
the locking mechanism
to slide over the Dome
and fasten securely
in place
Locking
Mechanism
Door
Casting
Incorrect Position - Dome catch too low
Maintenance & Servicing
Dome
Catch
Point of
Dome
Appliance
Body
When the catch is in
the correct position the
locking mechanism can
slide over the Dome
and drop far enough to
secure the door
Locking
Mechanism
Correct Position
10
11
Dome
Catch
Point of
Dome
Appliance
Body
Positioning the catch too
high will not allow the
locking mechanism to
drop far enough over the
Dome to secure the door
if the metal expands in
the heat
Locking
Mechanism
Door
Casting
Incorrect Position - Dome catch too high
6.5 To ensure a firm hold by the locking mechanism, the catch
should be positioned to allow the maximum distance of
travel up and down over the tapered end of the catch.
Note: If the point of the Dome Catch is in line with the
bottom of the locking mechanism this will prevent the
door from being pushed closed, too high and the catch
won't travel far enough down the other side of the catch
to hold the door if the metal expands when hot.
6.6 Fully tighten the lock nuts to secure the Dome Catch.
6.7 Open and close the door several times to the check the
adjustment.
7. Final Checks
7.1 Following these adjustments check that the door:
— Does not come into contact with the grate or log guard.
— Can be pushed shut without operating the door handle.
— Passes the paper sealing test.
Aligns with the side and top of the appliance.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax View Freestanding at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax View Freestanding in the language / languages: English as an attachment in your email.

The manual is 6.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stovax View Freestanding

Stovax View Freestanding Usermanual and installation guide - English - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info