813428

Stovax View 7 Inset High Output Boiler Inset Manual

28
Zoom out
Zoom in
Previous page
1/44
Next page
28
1.5 It is also recommended to fit a low limit thermostat on the
centralheatingreturnsetat45˚C,thisthermostatwillturnthe
pumpoffifthereturntemperaturefallsbelow45˚C.Thiswill
prevent corrosion and condensation within the appliance.
CONDENSATION
1.6 When filling the boiler with water for the first time, the cold
water entering the water jacket can cause condensation to
form on the surfaces of the appliance (inside and outside).
1.7 In certain conditions this condensation could result in a
considerable amount of water, in some cases enough to fill
the bottom of the appliance. This could be even worse if the
house has recently been re-decorated, wet plastered or any
other work has been undertaken which could result in high
humidity.
1.8 Precautions must be taken to ensure that this build up of
condensate does not overflow from the appliance onto any
surrounding fabric of the room e.g. carpets.
NOTE - THIS CONDENSATION IS NORMAL DURING
FILLING AND DOES NOT INDICATE A FAULTY OR
LEAKING APPLIANCE.
NORMAL RUNNING
1.9 During normal running this condensation should be minimal
if the system is fitted with the low limit thermostat as detailed
in 1.5. This low limit thermostat prevents the system pump
from running until the appliance has reached temperature.
SEASONAL USE
1.10 If this appliance is unused for lengthy periods of time it
should be periodically checked to ensure that condensation
is not building up within the appliance.
NOTE – THIS CONDENSATION IS NORMAL AND DOES
NOT INDICATE A FAULTY OR LEAKING APPLIANCE.
If the appliance is going to be unused for very long periods
of time it is recommended to drain the system.
NOTE – Further information on solid fuel central heating
systems can be found in the HETAS engineers training
manual.
LINK UP SYSTEMS
For information on how to link solid fuel boilers to other
heating appliances see Information For Dual System Link
Up Methods (PM286). This can be obtained through Stovax.
Call (01392) 474011, email info@stovax.com or visit
www.stovax.com for details.
Always seek the advice of a competent person* before
linking another heating system to a solid fuel boiler.
Installation Instructions
*Registered on the Competent Persons Scheme (GB
only) see page 38/ INFO (Republic of Ireland).
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax View 7 Inset High Output Boiler Inset at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax View 7 Inset High Output Boiler Inset in the language / languages: English as an attachment in your email.

The manual is 4.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info