813428
21
Zoom out
Zoom in
Previous page
1/44
Next page
21
Pre-Installation Instructions
5.5 To replace the baffle repeat the above steps in reverse,
ensuring the baffle fits over the supports on the sides of the
interior, see Diagram 3.
Rear
support
Front
support
Baffle In Place
Ensure baffle sits on
front supports
3
5.6 Remove and clean baffle system to ensure the flue ways are
clear of soot and debris and to ensure the safe and efficient
operation of the appliance. The frequency of cleaning will
depend on the appliance operating conditions.
5.7 The baffle system is designed to give safe and efficient
operation of the appliance. Replace damaged baffles
immediately.
Do not modify the baffle.
6. Removal of the Riddling Mechanism
The riddling mechanism can be removed for cleaning to
maintain good working condition.
To remove the riddling mechanism:
6.1 Remove the log guard to enable access, see Section 4.
6.2 Remove the baffle, see Section 5.
6.3 Remove the ashpan.
6.4 Remove the riddling bars, noting the order in which they sit,
see Diagram 4.
Lift bars to
remove
4
6.5 Remove Rear Bar, see Diagram 5.
5
To remove the Riddling Boss:
6.6 Use the 5mm hex key as shown in Diagram 6.
5mm Hex
Key
Riddling
Boss
Fixing
Screw
6
6.7 Unscrew the boss.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax View 7 Inset High Output Boiler Inset at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax View 7 Inset High Output Boiler Inset in the language / languages: English as an attachment in your email.

The manual is 4.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info