813456
6
Zoom out
Zoom in
Previous page
1/40
Next page
6
2. Using the Appliance for the First Time
2.1 To allow the appliance to settle, and fixing glues and paint
to fully cure, operate the appliance at a low temperature for
first few days.
2.2 Do not touch the paint during the first period of use.
2.3 During this time the appliance may give off some unpleasant
odours. Keep the room well ventilated to avoid a build-up of
fumes.
2.4 Please be aware that, during use, rope seals may discolour.
This is normal.
3. Recommended Fuels
3.1 Wood Logs:
Burn only seasoned timber with a moisture content of less
than 20%. To ensure this allow cut wood to dry for 12 to 18
months.
Wood Length
Appliance Wood Length
Riva Vision Midi 330mm
6
Poor quality timber:
— Causes low combustion efficiency
— Produces harmful condensation
— Reduces effectiveness of the airwash and life of the
appliance
Do not burn construction timber, painted, impregnated /
treated wood, manufactured board products or pallet wood.
3.2 Fuel consumption.
As tested at nominal heat output to the requirements of EN
13240: 2001 for intermittent operation:
Description
Fuel Consumption
Kg/hour
Wood
Vision Midi 1.5
A number of factors can affect the performance of the
appliance. See Troubleshooting Section for details.
4. Smoke Control Kit
This appliance is supplied with a pre-tted smoke
control kit and has been independently tested to
PD6434 making it exempt from the controls that
generally apply in Smoke Control Areas.
THE SMOKE CONTROL KIT IS SUPPLIED DISABLED
AND MUST THEREFORE BE MODIFIED BEFORE
INSTALLATION IN ORDER FOR THE APPLIANCE
TO MEET THE REQUIREMENTS OF A SMOKE
CONTROL AREA AND MUST BE OPERATED
CORRECTLY TO MINIMISE THE AMOUNT OF
SMOKE PRODUCED.
If this appliance is installed outside of a Smoke Control
Area then the Smoke Control kit can be left disabled to
give more control over the lower burn rates.
Any modifications to the kit should only be done by
a suitably qualified installer and must be done at
the time of installation.
4.1 This appliance is suitable for use in a Smoke Control
Area when burning wood and following the instructions
for use specied in this manual but ONLY if the Smoke
Control kit has been enabled.
4.2 If the Smoke Control kit is enabled, the air control slider has
restricted movement and can only be pulled out to 53mm,
see Diagram 7.
The air control can not be shut down completely.
7
Side View
53
4.3 If the Smoke Control kit is disabled, the air control slider can
be pulled out to 58mm, the maximum position, see Diagram 7.
The air control can be shut down completely.
If the Smoke Control kit is disabled, a notch is visible when
the air control is pulled out, see Diagram 8. This is not visible
if the Smoke Control kit is enabled.
8
Side View
58
End of
Channel
Getting Started/User Instructions
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax Riva Vision - Wood Freestanding Stove at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax Riva Vision - Wood Freestanding Stove in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info