813404
8
Zoom out
Zoom in
Previous page
1/10
Next page
8
2. Installation
- Studio Freestanding appliances
NOTE: A Drilling Template is not required for this
installation. Use the outer case of the appliance to mark
position, see 4.3.
4.1 Slide the bench over the coach bolts in the hearth and
tighten.
23
4.2 Remove the inner box from the outer casting:
Open the door.
Follow Freestanding instruction manual (PM452),
Installation Instructions, Section 2- 6 for removal of the door
and internal components (log guard, bricks, baffles etc).
Separate the inner box from the outer box as detailed in
Installation Instructions, Section 1.
4.3 Position the outer box on the bench taking care not to
damage the bench surface. Mark the position of the four
fixing holes in the hearth base.
If positioning the appliance against the edge of the
bench leave a 50mm clearance (See Diagram 24).
Fixing
holes
50mm
min
50mm
min
24
4.4 Drill the four Ø 8mm holes straight through both sides.
25
4.5 Insert the four coach bolts provided. Fix with the nuts and
washers provided.
Coach bolt
M6 Washer
& Nut
26
4.6 Re-insert the inner box into the outer casing and refit the
internal components.
27
4.7 Finish installation.
IMPORTANT
Check that this arrangement is secure. Open the door of
the appliance and check that it does not tip forward at
all.
Installation Instructions - Riva Freestanding Stoves
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax Riva Bench at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax Riva Bench in the language / languages: English as an attachment in your email.

The manual is 1.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info