597128
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
5.4 SYSTEM SETUP
Here you can adjust various system-wide options.
MENU ITEM
ADJUSTMENT
DESCRIPTION
Power Save
Off
The monitor will remain on all the time, unless disconnected from the
mains supply.
On
After a period of inactivity, the monitor will go into sleep mode. If the
camera’s microphone picks up any noise from the baby, the monitor will
immediately turn back on.
Sensitivity
Low
Only loud noises picked up on the camera’s microphone will trigger the
monitor to wake from sleep mode.
High
The monitor will wake from quieter sounds detected by the camera’s
microphone.
TV Mode
PAL
Generally, PAL is used in the UK, France and Hong Kong.
NTSC
NTSC is used in America and other territories.
PAIRING THE UNITS
The camera is paired to the monitor in the factory, but if for some reason they become unpaired (e.g. prolonged
period of no signal), you may need to re-pair the units. Up to four cameras can be used with a single monitor. Each
camera must be paired on a separate channel, numbered 1 to 4. By default, the first camera is paired to channel 1.
6.1 METHOD 1
1. Select the required channel by pressing or while no menu is on screen. If there is no camera paired to
the channel, a message stating “No Signal” will be displayed on the screen.
2. Press the PAIR key on the back of the monitor. Its power LED will flash, indicating it is in pair mode.
3. Press the PAIR key on the back of the camera. The pairing is complete when the monitor LED stops flashing.
6.2 METHOD 2
1. Select the required channel by pressing or while no menu is on screen. If there is no camera paired to
the channel, a message stating “No Signal” will be displayed on the screen.
2. Press the PAIR key on the back of the camera. Its power LED will flash, indicating it is in pair mode.
3. Press the PAIR key on the back of the monitor. The pairing is complete when the camera LED stops flashing.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Storage Options 53394 - Baby Cam Nursery at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Storage Options 53394 - Baby Cam Nursery in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info