597135
6
Zoom out
Zoom in
Previous page
1/16
Next page
Page 6
3.4 POWERING ON THE DVR
To turn the unit on, slide the power switch to the left. The “Power” LED on the front of the DVR will light up red to
indicate power.
To turn the unit off, slide the power switch back to the right. The “Power” LED on the front of the DVR will be
extinguished.
3.5 PAIRING THE CAMERA TO THE DVR
The camera is paired to the DVR in the factory, but if for some reason they become unpaired (e.g. prolonged period
of no signal), you may need to re-pair the units.
To pair the camera and DVR:
1. Remove the visor from the camera (slide it off).
2. Unscrew (anti-clockwise) the lens cover.
3. Press the small black PAIR button located just below the infra-red LEDs.
4. Press the PAIR button on the DVR.
5. Replace the lens cover on the camera.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Storage Options 53318 - Wireless CCTV Starter Kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Storage Options 53318 - Wireless CCTV Starter Kit in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info