Manual Storage Options 53317 - DIY Home CCTV Kit (page 57 of 60) (English)

597137

Zoom out

Zoom in

1/60

Page 57

TROUBLESHOOTING

If a solution to your problem is not listed below, please call our technical support team (see below).

PROBLEM

POSSIBLE CAUSES

SOLUTIONS

 System is not receiving power, or

is not powering up.

 Cable from power adapter is loose or

unplugged.

 Confirm that all cables are connected correctly.

 Confirm that the power adapter is securely connected to the

back of the unit.

 Cables are connected but system is not

receiving sufficient power.

 Confirm the system is powered on (LED indicators on front

panel should be on)

 If the DVR is connected through a power bar or surge protector,

try bypassing it and connecting power directly from the mains

socket to the DVR.

 Confirm that there is power at the outlet.

 Remote control is not detected by

the system.

 Batteries in the remote control are

drained.

 Install 2x fresh AAA 1.5V alkaline batteries in the remote

control.

 There are no batteries in the remote

control.

 Hard Disk Drive (HDD) is not

detected by the system.

 HDD cables are loose or not connected

properly.

 Remove the housing and check that the cables are firmly

connected.

 There is no HDD in the system.

 Open the housing and install a 3.5” SATA HDD (up to 2TB).

 HDD is full and the unit is no

longer recording

 Overwrite mode is not enabled.

 From the Main Menu, select HDD  Overwrite  Enable and

click apply.

 Mouse not detected by the

system.

 Mouse cable not firmly connected to

the system.

 Firmly connect the mouse cable to the “USB Mouse” port on the

front panel of the DVR.

 Mouse is not connected to the system.

 System needs to be reset.

 Power off the system (disconnect power cable). Firmly connect

a USB mouse to the “USB Mouse” port on the front panel of the

DVR. Reconnect the power cable to the DC 12V port.

 There is no picture on selected

channels / camera picture is not

being displayed.

 Camera cables are loose or have been

disconnected.

 Check the camera video cable and connections.

 Disconnect and reconnect the cable at both the system and

camera ends.

 Reconnect the camera to another channel or use another cable.

 There is no sound from attached

cameras.

 Audio cables are loose or have been

disconnected.

 Check the audio connections to the DVR.

 Audio channels are disabled in the

system menu.

 Check configuration in Main Menu  Record  Audio.

 Volume on external speakers (not

included) is low / muted / off.

 Increase volume on external speakers (not included).

 A “whirring” noise is coming from

the system.

 Fan is active.

 This is normal – the exhaust fan is working.

 The system beeps at start up.

 This is normal.

 The system beeps during motion

detection.

 Motion detection is enabled and the

alarm buzzer is activated.

 Check configuration in Main Menu  Advance.

 E-Mail notifications are not being

received.

 E-Mail notification is disabled.

 Open Main Menu  Advance  Alarm, click E-MAIL SETUP,

under E-MAIL select ON.

 SMTP settings are incorrect.

 Check SMTP server address, port, user name and password are

correct.

Support:

www.storageoptions.com/support/

Warranty:

www.storageoptions.com/warranty/

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Storage Options 53317 - DIY Home CCTV Kit in the language / languages: English as an attachment in your email.

The manual is 4,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Storage Options 53317 - DIY Home CCTV Kit Manual

Product: