597137
35
Zoom out
Zoom in
Previous page
1/60
Next page
Page 35
8.4 SYSTEM INFO
This page shows system information, including the firmware version, MAC address, and system serial number.
There are no user-configurable settings on this page.
8.5 MOTION DETECTION
Each channel can be configured to record based on motion being detected in the frame.
To configure motion detection:
1. Under STATUS, select ON to enable motion detection for that channel.
2. Under SENSITIVITY, select 1 (low), 2 (medium), 3 (high), or 4 (very high).
3. Under MD AREA, click SETUP. The red motion grid appears over the selected channel in full screen. Click the
blocks in the grid to enable or disable motion detection.
RED = motion detection enabled
CLEAR = motion detection disabled.
4. Right-click anywhere on the screen to return to the Motion
Detection menu.
5. Click APPLY to save changes, then click CLOSE in the confirmation
window.
6. Click EXIT to close the menu.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Storage Options 53317 - DIY Home CCTV Kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Storage Options 53317 - DIY Home CCTV Kit in the language / languages: English as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info