597139
33
Zoom out
Zoom in
Previous page
1/52
Next page
33
NETWORK SETTINGS
Before being able to access the DVR over a network, you need to make sure the network settings are correctly
configured.
* The above screenshot is only an example of valid network settings. Do not simply copy them onto your DVR as your network may differ.
To configure network settings:
1. Connect the DVR to your Internet router using a standard network cable with RJ45 connector.
2. Tick the “DHCP Enable” checkbox to allow your router to assign address information automatically, then click
“OK” to accept the changes. You will need to restart your DVR system before the changes take effect.
NOTE
Alternatively, if you would like to view your DVR remotely (i.e. outside your local network, over the
Internet) you will need to un-tick “DHCP Enable” and supply static address information manually.
For detailed help with configuring network access on your DVR, we recommend you follow the “Storage Options
Remote Access Guide”, which is available as a downloadable PDF from http://www.storageoptions.com/support/.
The guide covers the network setup and port forwarding process, including in-depth
instructions on the following:
Connecting equipment
Finding your router’s LAN and Internet IP addresses
Setting up your Storage Options system
Using the Ping tool to test configuration
Viewing your device in Internet Explorer
Configuring port forwarding
Configuring mobile devices (e.g. mobile phone)
Static / dynamic WAN IP addresses and configuring a DDNS account
33


Need help? Post your question in this forum.

Forumrules
1

Forum

storage-options-52399---4-channel-cctv-dvr

Reset search

  • which leads do you connectet the cameras to on the multiplug at thr rear of the recorder Submitted on 19-2-2020 at 17:50

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Storage Options 52399 - 4 Channel CCTV DVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Storage Options 52399 - 4 Channel CCTV DVR in the language / languages: English as an attachment in your email.

The manual is 4,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info