Manual Storage Options 52399 - 4 Channel CCTV DVR (page 29 of 52) (English)

597139

Zoom out

Zoom in

1/52

MOTION DETECTION RECORDING

The motion function can trigger recordings to take place whenever movement is detected by the DVR.

To set up 24-hour motion detection recording on all connected cameras:

1. Go to Main Menu  Setting  Detect

2. Set “Event Type” to “Motion Detect” and “Channel” to “All”.

3. Click to select the “Enable” checkbox, then click the “Select” button.

4. A grid will appear on screen. Areas marked in red will trigger motion detection and areas marked in black

will not trigger motion detection. By default, the whole viewport will be red. Left-click with the mouse to

change colours. Right-click when finished.

5. Choose a motion detection sensitivity level from 1 (lowest) to 5 (highest).

6. Next to “Schedule”, click the “Set” button to configure a schedule for motion recording. By default the

motion detection schedule is set to 24/7 recording. Click “Save” to keep any changes you have made.

7. For “Record Channel”, select all four cameras.

TIP

You can also set up an alarm output or configure the DVR to send an e-mail when motion is detected. See

section “E-Mail Configuration” (page 30) for more information.

8. Click “Save” to store the settings.

which leads do you connectet the cameras to on the multiplug at thr rear of the recorder Submitted on 19-2-2020 at 17:50
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Storage Options 52399 - 4 Channel CCTV DVR in the language / languages: English as an attachment in your email.

The manual is 4,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Storage Options 52399 - 4 Channel CCTV DVR Manual

Product: