Manual Stomer SRS-1100 (page 8 of 28) (English, German, French)

555271

Zoom out

Zoom in

1/28

any kickback force. Always use the auxiliary

handle, if included in the delivery, to ensure

optimum control over kickbacks or reaction

torques during start-up. The user can control

reaction torques or kickbacks if suitable pre-

cautionary measures are taken.

• Never place your hands near rotating tools.

Tools can kick back over your hand.

• Never position your body in the area in which

the machine moves in the event of a kickback.

A kickback accelerates the machine in the di-

rection of rotation opposed to the disc at the

jamming point.

• Take extra care when working in corners, on

sharp edges, etc. Avoid kickbacks and pre-

vent the tool from seizing. Corners, sharp

edges or a jump back tend to cause the ro-

tating tool to catch, thus leading to a loss of

control or a kickback.

Special safety instructions for ﬁ ne sanding

• Do not use excessively large sanding discs

when ﬁ ne sanding. Observe the speciﬁ cati-

ons of the manufacturer when selecting abra-

sive discs. A sanding disc that is too large and

protrudes over the sanding pad represents a

cutting injury hazard and can cause catching,

disc tears or kickbacks.

Additional warning notes

• Hold the machine ﬁ rmly with both hands and

assume a stable stance when performing

work. Hold the machine with both hands to

guide more securely.

• If potentially explosive or self-igniting dust is

produced during sanding, the processing in-

structions of the material manufacturer must

be observed under all circumstances.

• Harmful/toxic dusts can be produced during

your work (e.g. lead-containing paint, some

types of wood and metal). Contact with these

dusts, especially inhaling them, can represent

a hazard for operating personnel or persons

in the vicinity. Comply with the safety regula-

tions that apply in your country. Connect the

electric power tool to a suitable extraction

system. To protect your health, wear a protec-

tive mask.

• Never use machines with a damaged cable.

Do not touch damaged cables and pull the

plug from the mains power supply if the cable

becomes damaged during work. Damaged

cables increase the risk of electric shock.

ELECTRONICS

The machine features full-wave electronics with

the following properties:

Smooth start-up

The electronically controlled smooth start-up

function ensures that the machine starts up

smoothly.

Speed control

You can regulate the rotational speed steplessly

between 1500 and 2100 rpm using the adjusting

wheel. This enables you to optimise the cutting

speed to suit the respective material.

Constant speed

The preselected motor speed remains constant

through electronic control. This ensures a uni-

form cutting speed even when under strain.

CHANGING SANDING PADS

• Insert an Allen key into the Allen screw on the

sanding pad.

• Hold the sanding pad securely and turn the

Allen key to release.

In order to further ensure optimum axial run-

out, you must ﬁ rst clean the bearing surface

for the grinding disk on the driveshaft.

• Attach the new sanding pad.

• Tighten the screw.

Only attach speciﬁ ed sanding pads to the

machine.

AFFI XING ABRASIVES

Compatible sanding discs are quick and easy to

attach to the sanding pad. Simply press the self-

adhesive sanding discs onto the sanding pad.

The adhesive coating holds the sanding pad

securely in position. Make sure that the sanding

disc holes line up with the suction holes. Tear off

the sanding disc when worn.

ADJUSTING THE SUCTION POWER

You can adjust the suction power to match the

surface type, but only when internal extraction

is active.

• Use the adjusting wheel to adjust the suction

power.

• Start with a low suction power and slowly in-

crease until you can feel that the application

pressure has noticeably changed.

A high suction power makes sanding work on

ceilings and walls less tiring.

DUST EXTRACTION

CAUTION! Breathing in dust can dam-

age the respiratory passage!

• Always connect the machine to a dust extrac-

tor.

• When performing work that generates dust,

always wear a dust mask.

OPERATION

• Connect the machine to the mains power sup-

ply.

• Switch on the machine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stomer SRS-1100 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stomer SRS-1100 Manual

Product: